926M Wheel Loader

The Cat 926M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Click a link to download the document:

Videos
360° Views
M Series Small Wheel Loaders at Work M Series Small Wheel Loaders Overview Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips Secondary Display Navigation | M Series Small Wheel Loader Operator Tips Preventative Maintenance | M Series Small Wheel Loader Operator Tips Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips Creeper Control | M Series Small Wheel Loader Operator Tips Rim Pull | M Series Small Wheel Loader Operator Tips Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips Throttle Lock | M Series Small Wheel Loader Operator Tips Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips Quick Steer | M Series Small Wheel Loader Operator Tips Power Train Modes | M Series Small Wheel Loader Operator Tips Cab Controls and Features | M Series Small Wheel Loader Operator Tips Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips Reversing Fan | M Series Small Wheel Loader Operator Tips Customize Your Experience | M Series Small Wheel Loader Operator Tips Tire Pressure Monitoring System | Cat® 926M, 930M, 938M Small Wheel Loader Cat® Production Measurement (CPM) | M Series Small Wheel Loader Operator Tips Differential Lock | M Series Small Wheel Loader Operator Tips

Benefits & Features

Product Specs

Weights

Operating Weight
28770lb

Buckets

Bucket Capacities
1.9-5.0 m3 (2.5-6.5 yd3)
Bucket Capacities – General Purpose
1.9-2.5 m3 (2.5-3.2 yd3)
Bucket Capacities – Light Material
3.1-5.0 m3 (4.0-6.5 yd3)

Engine

Maximum Rated Gross Power: ISO 14396
153hp
Rated Net Power
148hp
Maximum Rated Gross Power: ISO 14396 (DIN)
155hp
Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800rpm
Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4)
153hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
155hp
Rated Net Power at 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
148hp
Engine Model
Cat® C7.1 ACERT™
Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
149hp
Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
151hp
Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)
531lbf-ft
Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)
511lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
517lbf-ft
Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600rpm
Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)
146hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
148hp
Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
141hp
Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
142hp
Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
144hp
Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)
531lbf-ft
Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)
511lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
517lbf-ft
Displacement
427in3
Bore
4in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Stroke
5in
Note
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Power
153hp
Note
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note
Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Steering

Steering Cylinder: Double Acting – Bore Diameter
2.8in
Steering Cylinder: Double Acting – Rod Diameter
1.6in
Steering Cylinder: Double Acting – Stroke
17.2in
Maximum Flow – Steering Pump
34gal/min
Maximum Working Pressure – Steering Pump
3500psi
Maximum Steering Torque – 0° (Straight Machine)
37155lbf-ft
Maximum Steering Torque – 40° (Full Turn)
27747lbf-ft
Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
2.8seconds
Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed
2.4seconds
Note
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Loader Hydraulic System

Maximum Flow – Implement Pump
40gal/min
Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
40gal/min
Maximum Flow – Implement Pump: 4th Function Maximum Flow*
40gal/min
Maximum Working Pressure – Implement Pump
3771psi
Relief Pressure – Tilt Cylinder
4061psi
Relief Pressure – Tilt Cylinder: 3rd and 4th Function Maximum Working Pressure
3771psi
Relief Pressure – Tilt Cylinder: 3rd and 4th Function Relief Pressure
4061psi
Lift Cylinder: Double Acting – Bore Diameter
4.3in
Lift Cylinder: Double Acting – Rod Diameter
2.4in
Lift Cylinder: Double Acting – Stroke
28.7in
Tilt Cylinder: Double Acting – Bore Diameter
5.1in
Tilt Cylinder: Double Acting – Rod Diameter
2.8in
Tilt Cylinder: Double Acting – Stroke
21.9in
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)
5.5/6.2 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)
2.6/2.6 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time
9.6/10.5 seconds
Note
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Note
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Service Refill Capacities

Fuel Tank
51.5gal
Cooling System
7.9gal
Engine Crankcase
5.3gal
Transmission (Gear Box)
2.2gal
Front Axles
5.5gal
Rear Axles
5.5gal
Hydraulic System (Including Tank)
42.3gal
Hydraulic Tank
23.8gal
Diesel Exhaust Fluid (DEF) Tank
5.0gal

Transmission

Forward and Reverse: Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse: Range 2
8mph
Forward and Reverse: Range 3
17mph
Forward and Reverse: Range 4
25mph
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Note (cont'd)
Factory default is 7 km/h (4.4 mph).

Tires

Standard Size
20.5 R25, radial (L-3)
Other Choices Include:
20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); Flexports Gen II
Other Choices Also Include:
17.5 R25, radial (L-2); 17.5 R25, radial (L-3); 17.5 R25, radial (L-5); 550/65 R25 radial (L-3); Skidder/Agriculture

Cab

ROPS
ISO 3471: 2008
FOPS
ISO 3449: 2005 LEVEL II
Note
Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab
Note
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Dimensions

Width over tires
8.33
Height to Top of ROPS/FOPS
10.95ft
Height to Center of Axle
2.24ft
Ground Clearance
1.3ft
Overall Length
24.44ft
Length - Rear Axle to Bumper
6.51ft
Center Line of Front Axle-Hitch
4.95ft
Wheel Base Length
9.84ft
Dump Clearance-Max Lift-45°
9.46ft
Bucket Pin Height at Max Lift
12.81ft
Overall Height - Bucket Raised
16.65ft
Reach at Max Lift and 45° Dump
3.35ft
Rack Back Angle at Max Lift
54.0 Degrees
Dump Angle at Max Lift
50.0 Degrees
Rack Back Angle at Carry
33.0 Degrees
Carry Height
1.50ft
Digging Depth
0.32ft

Operating Specificatons

Full Turn Tip Load
16587lb

Operating Specifications

Reach - full lift/45 degree dump angle
3.35ft
Full lift/45 degree dump angle
9.46ft
Articulation Angle
40.0 Degrees

Power Train

Front Axle
Fixed
Front Axle: Traction Aid (standard)
Locking differential
Rear Axle
Oscillating
Rear Axle: Oscillation Angle by Tire Size – 17.5 R25
± 13.5 degrees
Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle: Oscillation Angle by Tire Size – Solid Tires, 750/65, 620/65, Skidder
± 7 degrees
Rear Axle: Traction Aid (optional)
Limited slip differential
Brakes: Service
Inboard wet disc
Brakes: Park
Spring applied hydraulically released
Note
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Worktool Attachments

Equipment

  • Power Train
    • Axle seal guards
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine
      – Power Modes (Standard and Performance)
      – Power by Range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Diesel particulate filter (Fit for Life)
    • Coolant protection to –34° C (–29° F)
    • Differential lock in front axle
    • Dry type air cleaner
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Fuel water separator
    • Hydraulically driven demand cooling fan
    • Intelligent hydrostatic transmission
      – Power train modes
      – Directional shift aggressiveness
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Lubed for life driveshafts
    • Parking brake, electric
    • Wide spaced 6 fins per inch cooling package
    • S·O·SSM sampling ports
    • Throttle lock and maximum speed limiter
  • Hydraulics
    • Automatic lift, lower and tilt kickouts
    • Bucket and Fork Modes, adjustable in-cab
    • Cylinder damping at kickout and end stops
    • Fine Mode control in Fork Mode
    • Hydraulic Response setting
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • Electrical
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24 volt system
    • Back-up alarm
    • Emergency shutdown switch
    • Heavy duty gear reduction starter
    • Product Link PRO with subscription
    • Remote jump start post
    • Resettable critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, enclosed and pressurized
    • Cup holders
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Gauges
      – Digital hour, odometer, tachometer, ground speed and direction indicator
      – Engine coolant temperature gauge
      – Fuel and Diesel Exhaust Fluid level
      – Hydraulic oil temperature gauge
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Operator warning system indicators
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted controls, adjustable
    • Sliding glass on the side windows
    • Column mounted multi function control – lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt and telescopic steering wheel
    • Wet arm wiper/washer, front and rear
  • Other Standard Equipment
    • Large-access enclosure doors
    • Parallel lift loader linkage
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures

Optional Equipment

  • Optional Equipment
    • Antifreeze/coolant, extended-life
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Axles, differential, limited slip, rear
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe):
      – Automatic blower control
      – Electrically adjustable heated mirrors (2)
      – LED interior lighting
      – Touchscreen secondary display
    • Ride control adjustable speed activation
    • Preventative maintenance reminders
    • Integrated help function (26 languages)
    • Sunscreen, front and rear
    • Camera, rearview (standard in Europe)
    • Cold start package:
      – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Counterweight, (heavy and logger)
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guards
      – Power train, (lower, side, driveshaft and crankcase)
      – Windshield and lights
      – Cylinders, tilt and steering
      – Rear radiator, heavy duty
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine compartment lights
    • Payload Technology
      – Cat Production Measurement (CPM)
      – CPM Printer
    • Rear Object Detection
    • Radio packages:
      – Radio ready with Bluetooth
      – Radio, AM/FM with Bluetooth and clock
      – Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
    • Seats:
      – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
    • Steering:
      – Dual mode and Secondary
    • Tires:
      – Bias ply, 17.5, 20.5-25, Skidder
      – Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
      – Solid tires, 620/65, 750/65 Agriculture
    • Tire Pressure Monitoring (TPM)
    • Toolbox
    • Work tools

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations