24 Motor Grader
24 Motor Grader
Maximize your minesite’s productivity with the Cat® 24 motor grader. By building and maintaining haul roads, the 24 motor grader is designed to help you get more work done with lower owning and operating costs. Stay safe and comfortable with the updated cab.
Learn More About This Piece of Equipment

Product Specs
Blade Range
- Moldboard Sideshift - Left
- 38.2in
- Maximum Shoulder Reach Outside of Rear Tires - Right
- 125in
- Maximum Lift Above Ground
- 16.1in
- Circle Centershift - Left
- 31.7in
- Maximum Shoulder Reach Outside of Rear Tires - Left
- 125in
- Circle Centershift - Right
- 17.2in
- Blade Tip Range - Forward
- 40°
- Moldboard Sideshift - Right
- 45.3in
- Blade Tip Range - Backward
- 0°
- Maximum Depth of Cut
- 21.7in
Weights
- Gross Vehicle Weight - Typically Equipped - Front Axle
- 44466lb
- Gross Vehicle Weight - Base* - Rear Axle
- 113910lb
- Gross Vehicle Weight - Base* - Front Axle
- 43858lb
- Operating Weight - Typically Equipped
- 161695lb
- Gross Vehicle Weight - Typically Equipped - Rear Axle
- 117229lb
- Gross Vehicle Weight - Base* - Total
- 157769lb
- Note
- *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab.
- Gross Vehicle Weight - Typically Equipped - Total
- 161695lb
Moldboard
- Blade Height
- 40in
- Thickness
- 2in
- Blade Width
- 24ft
Engine
- Displacement
- 1648in³
- Number of Cylinders
- 12
- Base Power (1st Gear) - Net
- 535HP
- Engine Model
- Cat C27 ACERT
- Bore
- 5.4in
- Stroke
- 6in
- Speed at Rated Power
- 1,800 rpm
- Base Power (1st gear) - Net (Tier 4)
- 535HP
- Emissions
- Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
- Maximum Altitude - Full Power (Tier 2)
- 15000ft
- Maximum Altitude - Full Power (Tier 4)
- 10000ft
- Note (1)
- Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
- Note (2)
- Optimized VHP Plus is standard for the 24.
- Note (3)
- Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Peak Net Torque
- 2417ft·lbf
- Note (4)
- Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
- Torque Rise
- 19%
- Standard Capability
- 122°F
- Standard - Fan Speed
- 1,300 rpm
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne.
Front Frame Structure
- Front Axle - Wheel Lean - Left/Right
- 18°
- Front Axle - Total Oscillation per Side
- 32°
- Circle - Outer Diameter
- 104in