962M Wheel Loader | Front Loader | Tier 4

962M Medium Wheel Loader

962M Wheel Loader | Front Loader | Tier 4

The 962M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.

Product Specs

Dimensions

Height - Top of Hood
106in
Height - Top of ROPS
136in
Lift Arm Clearance at Maximum Lift
136in
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Wheel Base
132in
Hinge Pin Height at Carry Height
26in
Centerline of Rear Axle to Edge of Counterweight
85in
Centerline of Rear Axle to Hitch
66in
Height - Top of Exhaust Pipe
134in
Ground Clearance
14in
Hinge Pin Height at Maximum Lift
167in
Maximum Width over Tires (loaded)
111in
Overall Length (without bucket)
285in
Tread Width
84in

Operating Specifications

Note (1)
For a machine configuration as defined under ?Weight.?
Static Tipping Load - Full 40° Turn - With Tire Deflection
25814lb
Static Tipping Load - Full 40° Turn - No Tire Deflection
27494lb
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
42489

Engine

Maximum Net Power - 2,100 rpm - SAE J1349
250HP
Maximum Net Torque - 1,350 rpm
865ft·lbf
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Net Power - ISO 9249
250HP
Displacement
428in³
Maximum Net Power - 2,100 rpm - ISO 9249
250HP
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
253HP
Maximum Power - 2,100 rpm - ISO 14396
269HP
Maximum Power - 2,100 rpm - ISO 14396 - Metric
273HP
Maximum Power - 2,100 rpm - SAE J1995
271HP
Peak Gross Torque - 1,350 rpm - ISO 14396
918ft·lbf
Peak Gross Torque - 1,350 rpm - SAE J1995
921ft·lbf
Engine Model
Cat C7.1 ACERT

Hydraulic System

Implement System - Maximum Pump Output at 2,150 rpm
76gal/min
Implement System - Maximum Operating Pressure
4250psi
Hydraulic Cycle Time - Total
8.9s
Implement Pump Type
Variable Axial Piston

Dimensions - Standard Lift

Hinge Pin Height at Carry Height
2.17ft
Maximum Width - Over Tires - Loaded
9.25ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
37 degrees
Centerline of Rear Axle to Edge of Counterweight
7.08ft
Centerline of Rear Axle to Hitch
5.5ft
Ground Clearance
1.17ft
Height - Top of Exhaust Pipe
11.17ft
Height - Top of Hood
8.83ft
Height - Top of ROPS
11.33ft
Hinge Pin Height at Maximum Lift
13.92ft
Lift Arm Clearance at Maximum Lift
11.33ft
Overall Length - Without Bucket
23.75ft
Tread Width
7ft
Wheel Base
11ft

Dimensions - High Lift

Hinge Pin Height at Carry Height
2.58ft
Maximum Width - Over Tires - Loaded
9.25ft
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
37 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Centerline of Rear Axle to Edge of Counterweight
7.08ft
Centerline of Rear Axle to Hitch
5.5ft
Ground Clearance
1.17ft
Height - Top of Exhaust Pipe
11.17ft
Height - Top of Hood
8.83ft
Height - Top of ROPS
11.33ft
Hinge Pin Height at Maximum Lift
14.83ft
Lift Arm Clearance at Maximum Lift
11.83ft
Overall Length - Without Bucket
23.75ft
Tread Width
7ft
Wheel Base
11ft

Weights

Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,
Operating Weight
44591lb

Transmission

Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Forward - 1
4.3mile/h
Forward - 2
7.5mile/h
Forward - 3
12mile/h
Forward - 4
16mile/h
Reverse - 1
4.3mile/h
Reverse - 2
7.5mile/h
Reverse - 3
16mile/h
Forward - 5
24.5mile/h

Sound

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Engine - Tier 4 Final/Stage IV

Emissions
Tier 4/Stage IV

Service Refill Capacities

Cooling System
15.6gal (US)
Crankcase
5.8gal (US)
DEF Tank
4.2gal (US)
Differential - Final Drives - Front
11.4gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Fuel Tank
72.6gal (US)
Hydraulic Tank
33gal (US)
Transmission
11.4gal (US)

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Worktool Attachments

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations