950M Wheel Loader | Front Loader | Tier 4

950M Medium Wheel Loader

950M Wheel Loader | Front Loader | Tier 4

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.

Product Specs

Dimensions

Hinge Pin Height at Carry Height
25in
Hinge Pin Height at Maximum Lift
159in
Centerline of Rear Axle to Edge of Counterweight
76in
Centerline of Rear Axle to Hitch
66in
Ground Clearance
14in
Height - Top of Exhaust Pipe
90in
Height - Top of Hood
106in
Height - Top of ROPS
92in
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Wheel Base
132in
Maximum Width over Tires (loaded)
111in
Overall Length (without bucket)
272in
Tread Width
84in

Engine

Maximum Net Power - 2,100 rpm - SAE J1349
230HP
Peak Gross Torque - 1,300 rpm - SAE J1995
911ft·lbf
Emissions
Tier 4/Stage IV
Engine Model
Cat C7.1 ACERT
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Net Power - ISO 9249
230HP
Displacement
428in³
Maximum Net Power - 2,100 rpm - ISO 9249
230HP
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
232HP
Maximum Power - 2,100 rpm - ISO 14396
249HP
Maximum Power - 2,100 rpm - ISO 14396 - Metric
253HP
Maximum Power - 2,100 rpm - SAE J1995
250HP
Peak Gross Torque - 1,300 rpm - ISO 14396
908ft·lbf
Maximum Net Torque - 1,300 rpm
858ft·lbf

Hydraulic System

Implement System - Maximum Pump Output at 2,150 rpm
76gal/min
Implement System - Maximum Operating Pressure
4250psi
Implement Pump Type
Variable Axial Piston
Hydraulic Cycle Time - Total
8.9s

Operating Specifications

Static Tipping Load - Full 40° Turn - No Tire Deflection
25926lb
Static Tipping Load - Full 40° Turn - With Tire Deflection
24262lb
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
40690

Sound

Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69dB(A)

Transmission

Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Forward - 1
4.3mile/h
Forward - 2
7.5mile/h
Forward - 3
12mile/h
Forward - 4
16mile/h
Reverse - 1
4.3mile/h
Reverse - 2
7.5mile/h
Reverse - 3
16mile/h
Forward - 5
24.5mile/h

Weights

Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,
Operating Weight
42357lb

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Dimensions - High Lift

Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
40 degrees
Centerline of Rear Axle to Edge of Counterweight
6.33ft
Centerline of Rear Axle to Hitch
5.5ft
Ground Clearance
1.17ft
Height - Top of Exhaust Pipe
11.17ft
Height - Top of Hood
8.83ft
Height - Top of ROPS
11.33ft
Hinge Pin Height at Carry Height
2.58ft
Hinge Pin Height at Maximum Lift
14.83ft
Lift Arm Clearance at Maximum Lift
11.92ft
Maximum Width - Over Tires - Loaded
9.25ft
Overall Length - Without Bucket
24.58ft
Tread Width
7ft
Wheel Base
11ft

Dimensions - Standard Lift

Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
36 degrees
Centerline of Rear Axle to Edge of Counterweight
6.33ft
Centerline of Rear Axle to Hitch
5.5ft
Ground Clearance
1.17ft
Height - Top of Exhaust Pipe
11.17ft
Height - Top of Hood
8.83ft
Height - Top of ROPS
11.33ft
Hinge Pin Height at Carry Height
2.08ft
Hinge Pin Height at Maximum Lift
13.25ft
Lift Arm Clearance at Maximum Lift
10.75ft
Maximum Width - Over Tires - Loaded
9.25ft
Overall Length - Without Bucket
22.67ft
Tread Width
7ft
Wheel Base
11ft

Engine - Tier 4 Final/Stage IV

Emissions
Tier 4/Stage IV

Service Refill Capacities

Cooling System
15.6gal (US)
Crankcase
5.8gal (US)
DEF Tank
4.2gal (US)
Differential - Final Drives - Front
11.4gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Fuel Tank
72.6gal (US)
Hydraulic Tank
33gal (US)
Transmission
11.4gal (US)

Worktool Attachments

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations