160M AWD Motor Grader

160M AWD Motor Grader (Environment Canada Tier 3)

160M AWD Motor Grader

The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. From building roads to maintaining them, M Series Motor Graders are designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.

Benefits & Features

Product Specs

Engine

Base Power (1st gear) - Net
213.0hp
Engine Model
Cat® C9 ACERT™
Bore
4.4in
Stroke
5.9in
Speed @ Rated Power
2,000 rpm
Emissions
Engine is Certified for Environment Canada Tier 3 Standards
Maximum Torque (AWD on)
991.0lb ft
Torque Rise (VHP Plus)
40%
VHP Plus Range - Net
159-200 kW (213-268 hp)
Displacement
537.0in3
Number of Cylinders
6
Derating Altitude
10000.0ft
High Ambient - Fan Speed - Maximum
1,650 rpm
High Ambient - Fan Speed - Minimum
600 rpm
High Ambient Capability
122.0° F

Weights

Operating Weight - Typically Equipped
45432.0lb
Gross Vehicle Weight - Typically Equipped
45432.0lb

Moldboard

Blade Width
12.0ft
Moldboard - Height
24.0in
Moldboard - Thickness
0.87in
Arc Radius
16.3in
Throat Clearance
3.7in
Cutting Edge - Width
6.0in
Cutting Edge - Thickness
0.6in
End Bit - Width
6.0in
End Bit - Thickness
0.6in
Blade Pull - Base GVW (AWD)
35344.0lb
Blade Pull - Maximum GVW (AWD)
47515.0lb
Down Pressure - Base GVW (AWD)
18868.0lb
Down Pressure - Maximum GVW (AWD)
28998.0lb
Moldboard - Width
12.0ft

Operating Specifications

Top Speed - Forward
29.5mph
Top Speed - Reverse
23.3mph
Turning Radius, Outside Front Tires
24.93ft
Steering Range - Left/Right
47.5 degrees
Articulation Angle - Left/Right
20 degrees
Forward - 1st
2.5mph
Forward - 2nd
3.5mph
Forward - 3rd
5.0mph
Forward - 4th
7.0mph
Forward - 5th
10.8mph
Forward - 6th
14.7mph
Forward - 7th
20.3mph
Forward - 8th
29.5mph
Reverse - 1st
2.0mph
Reverse - 2nd
3.8mph
Reverse - 3rd
5.5mph
Reverse - 4th
8.5mph
Reverse - 5th
16.0mph
Reverse - 6th
23.3mph

Service Refill

Fuel Capacity
110.0gal
Cooling System
10.6gal
Hydraulic System - Tank
16.9gal
Trans./Diff./Final Drives
17.2gal
Engine Oil
7.9gal
Tandem Housing (each)
21.1gal
Front Wheel Spindle Bearing Housing
0.13gal
Circle Drive Housing
1.8gal

Power Train

Forward/Reverse Gears
8 Forward/6 Reverse
Transmission
Direct drive, power shift, countershaft
Brakes - Service
Multiple oil disc
Brakes - Service, Surface Area
3565.0in2
Brakes - Parking
Multiple oil disc
Brakes - Secondary
Dual circuit control system

Hydraulic System

Circuit Type
Electro-hydraulic load sensing, closed center
Pump Type
Variable piston
Pump Output
55.7gal/min
Maximum System Pressure
3500.0psi
Standby Pressure
450.0psi

Frame

Drawbar - Width
3.0in
Circle - Diameter
61.1in
Circle - Blade Beam Thickness
1.6in
Drawbar - Height
6.0in
Circle - Height
6.3in
Front Frame Structure - Height
12.0in
Front Frame Structure - Thickness
0.6in
Front Frame Structure - Width
12.0in
Front Axle - Height to Center
22.5in
Front Axle - Wheel Lean, Left/Right
18 degrees
Front Axle - Total Oscillation per Side
32 degrees

Blade Range

Circle Centershift - Right
28.7in
Circle Centershift - Left
27.4in
Moldboard Sideshift - Right
37.4in
Moldboard Sideshift - Left
32.3in
Maximum Blade Position Angle
90 degrees
Blade Tip Range - Forward
40 degrees
Blade Tip Range - Backward
5 degrees
Maximum Shoulder Reach Outside of Tires - Right
89.7in
Maximum Shoulder Reach Outside of Tires - Left
82.3in
Maximum Lift above Ground
17.8in
Maximum Depth of Cut
29.5in

Dimensions

Height to Exhaust Stack (AWD)
128.2in
Height - Top of Cab Product Link
133.0in
Length - Push Plate to Ripper
399.1in
Length - Push Plate to Ripper Retracted
386.5in
Width - Outside Front Tires (AWD)
102.1in
Width - Tire Center Lines Front (AWD)
87.5in
Height - Top of Cab
130.2in
Length - Front Axle to Mid Tandem
241.1in
Length - Front Tire to Rear of Machine
344.6in
Length - Front Axle to Moldboard
100.5in
Length - Between Tandem Axles
60.0in
Width - Outside Rear Tires
98.9in
Height - Front Axle Center
23.5in
Height to Top of Cylinders
119.7in
Ground Clearance at Rear Axle
13.3in

Weights - AWD

Gross Vehicle Weight - Base - Front Axle
10992.0lb
Gross Vehicle Weight - Base - Rear Axle
28278.0lb
Gross Vehicle Weight - Base - Total
39271.0lb
Gross Vehicle Weight - Maximum - Front Axle
16894.0lb
Gross Vehicle Weight - Maximum - Rear Axle
35900.0lb
Gross Vehicle Weight - Maximum - Total
52794.0lb
Gross Vehicle Weight - Typically Equipped - Front Axle
13455.0lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
31976.0lb
Gross Vehicle Weight - Typically Equipped - Total
45432.0lb

Standards

Brakes
ISO 3450:1996
ROPS/FOPS
ISO 3471:1994, ISO 3449:1992
Sound
ISO 6394:2008, ISO 6395:2008
Steering
ISO 5010:2007

Net Power: AWD Off

Gear: Forward - 1st
213.0hp
Gear: Forward - 2nd
218.0hp
Gear: Forward - 3rd
223.0hp
Gear: Forward - 4th
228.0hp
Gear: Forward - 5th
233.0hp
Gear: Forward - 6th
238.0hp
Gear: Forward - 7th
243.0hp
Gear: Forward - 8th
248.0hp
Gear: Reverse - 1st
213.0hp
Gear: Reverse - 2nd
218.0hp
Gear: Reverse - 3rd - 6th
223.0hp

Net Power: AWD On

Gear: Forward - 1st
223.0hp
Gear: Forward - 2nd
238.0hp
Gear: Forward - 3rd
243.0hp
Gear: Forward - 4th
248.0hp
Gear: Forward - 5th
268.0hp
Gear: Forward - 6th
268.0hp
Gear: Forward - 7th
268.0hp
Gear: Forward - 8th
268.0hp
Gear: Reverse - 1st
213.0hp
Gear: Reverse - 2nd
218.0hp
Gear: Reverse - 3rd - 6th
223.0hp

Scarifier

Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
4.6in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
18.4in
Front, V-Type, 5 or 11 Tooth - Working Width
47.4in
Mid, V-Type - Scarifier Shank Holder Spacing
4.6in
Mid, V-Type - Scarifier Shank Holders
11
Mid, V-Type - Scarifying Depth, Maximum
11.5in
Mid, V-Type - Working Width
46.6in
Rear - Scarifying Depth, Maximum
10.5in
Rear - Working Width
91.0in
Rear - Scarifier Shank Holders
9
Rear - Scarifier Shank Holder Spacing
10.5in

Net Power: VHP Plus

Gear: Forward - 1st
213.0hp
Gear: Forward - 2nd
218.0hp
Gear: Forward - 3rd
223.0hp
Gear: Forward - 4th
228.0hp
Gear: Forward - 5th
233.0hp
Gear: Forward - 6th
238.0hp
Gear: Forward - 7th
243.0hp
Gear: Forward - 8th
248.0hp
Gear: Reverse - 1st
213.0hp
Gear: Reverse - 2nd
218.0hp
Gear: Reverse - 3rd - 6th
223.0hp

Ripper

Ripper Shank Holder Spacing
21.0in
Ripping Depth - Maximum
16.8in
Ripper Shank Holders
5
Penetration Force
20540.0lb
Pryout Force
26259.0lb
Machine Length Increase, Beam Raised
39.2in

Tandems

Height
22.5in
Width
8.0in
Sidewall Thickness - Inner
1.0in
Sidewall Thickness - Outer
0.7in
Drive Chain Pitch
2.0in
Wheel Axle Spacing
60.0in
Tandem Oscillation - Front Up
15 degrees
Tandem Oscillation - Front Down
25 degrees

Equipment

  • Power Train
    • Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
    • Air-to-air after cooler (ATAAC)
    • Belt, serpentine, automatic tensioner
    • Brakes, oil disc, four-wheel, hydraulic
    • Demand fan, hydraulic
    • Differential Lock/Unlock, Automatic
    • Drain, engine oil, ecology
    • Electronic over speed protection
    • Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Engine is Certified for Environment Canada Tier 3 standards.
    • Engine Idle Shutdown (EIS)
    • Fuel tank, 416 L (110 gal), ground level access and sediment drain
    • Fuel-water separator
    • Muffler, underhood
    • Parking brake - multi-disc, sealed, oil‑cooled
    • Priming pump, fuel
    • Rear axle, modular
    • Sediment drain, fuel tank
    • Tandem drive
    • Transmission, 8F/6R, power shift, direct drive
    • VHP Plus (Variable Horsepower Plus)
  • Electrical
    • Alarm, back up
    • Alternator, 80 ampere, sealed
    • Batteries, maintenance free, heavy duty, 1,125 CCA
    • Breaker panel, ground accessible
    • Cab harness and electrical hydraulic valves
    • Electrical system, 24V
    • Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
    • Lights, roof-mounted roading, reversing, LED stop and tail
    • Product Link Ready
    • Starter, electric
  • Operator Environment
    • Accelerator
    • Air conditioning with heater
    • Arm and wrist rest, electronically adjustable
    • Articulation, automatic Return-to-Center
    • Cat Messenger operator information system
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauge, machine level
    • Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
    • Hour meter, digital
    • Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
    • Joystick, adjustable armrests
    • Joystick gear selection
    • Joystick hydraulic power steering
    • Ladders, cab, left and right side
    • Lights, night time cab
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio Ready, Entertainment
    • ROPS cab, sound suppressed
    • Seat, cloth-covered, comfort suspension
    • Seat belt, retractable 76 mm (3 in)
    • Storage area for cooler/lunchbox
    • Throttle control, electronic
    • Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
  • Fluids
    • Antifreeze
    • Extended Life Coolant to -35° C (-30° F)
  • Tires, Rims And Wheels
    • Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
  • Other Standard Equipment
    • Anti-glare paint
    • Brake accumulators
    • Bumper, rear, integrated with hitch
    • CD ROM Parts Book
    • Clutch, circle drive slip
    • Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Doors (3), engine compartment, locking
    • Drawbar - 6 shoes, replaceable wear strips
    • Electrical hydraulic valves, hydraulic lines for base 8 functions
    • Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Fluid check, ground level
    • Frame, articulated, with safety lock
    • Ground level engine shutdown
    • Ground level fueling
    • Hammer (emergency exit)
    • Horn, electric
    • Hydraulic lines for base functions
    • Lockout, hydraulic implement (for roading and servicing)
    • Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
    • Mounting, cab roof accessories
    • Pump, hydraulic, high capacity, 98 cm³ (6 in³)
    • Radiator, cleanout access
    • Secondary steering
    • Serviceability, left-hand side
    • SOSSM ports: engine, hydraulic, transmission, coolant, fuel
    • Tandem walkway/guards
    • Tool box
    • Tow hitch

Optional Equipment

  • Electrical
    • Alternator, 150 ampere
    • Batteries: extreme duty, 1,400 CCA
    • Converter, communication (CB)
    • Lights: Headlights, high
    • Lights: Headlights, low
    • Lights: Working lights, basic
    • Lights: Working lights, plus
    • Lights: Warning: beacon or strobe
    • Lights: Mounting for warning light
  • Guards
    • Articulation guard
    • Axle hose guard
    • Fenders, front
    • Fenders, rear
    • Sound guard (bottom)
    • Transmission guard
  • Operator Environment
    • Bluetooth
    • Fan, defroster, rear window
    • Mirrors, outside: heated 24V
    • Mirrors, outside: mounted
    • Precleaner, HVAC
    • Radio ready, AM/FM
    • Seat, air suspension, cloth
    • Shade, sun
    • Wiper/washer, rear
  • Power Train
    • Precleaner, snow/debris
    • Transmission, autoshift
  • Other Attachments
    • AccuGrade ARO
    • Accumulators, blade lift
    • Camera, rearview
    • Cat Grade Control Cross Slope
    • Cat Product Link 321 (Satellite)
    • Cat Product Link 522 (Cellular)
    • Compressor/tank, air
    • Heater, engine coolant: 120V
    • Heater, engine coolant: 240V
    • Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier.
    • Security system
    • Snow wing mounting, frame ready
    • Sound suppression
    • Starting aid, ether
  • Work Tools/ground Engaging Tools
    • Blade extension, left hand, 610 mm (2 ft)
    • Endbits, overlay
    • Front lift group, mounting
    • Front lift group
    • Mid-Mount Scarifier, Package
    • Mid-Mount Scarifier, Mounting
    • Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)
    • Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in)
    • Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in)
    • Push plate
    • Ripper, mounting
    • Ripper, rear
    • Ripper tooth
    • Scarifier, front
  • Machine Arrangements
    • Snow Arrangement
  • Optional Tire Arrangements
    • Rim Size - 10 x 24; Wheel Group - Multi-Piece; Tires - 14.00-24
    • Rim Size - 10 x 24; Wheel Group - Multi-Piece; Tires - 14.00R24
    • Rim Size - 14 x 25; Wheel Group - Multi-Piece; Tires - 17.5R25
    • Note: Consult your dealer for individual tire width, size, and brand.

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations