6060/6060 FS Hydraulic Shovel

6060/6060 FS Hydraulic Shovel

6060/6060 FS Hydraulic Shovel

We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That’s why we continually strive to produce the safest, most reliable and productive hydraulic mining shovels possible. Offering the widest payload range of any manufacturer in the industry, the ability to optimally pair with our popular line of mining trucks, and the support of our world-class Cat dealer network, we are uniquely positioned to partner with you to help achieve your productivity targets. We understand what matters to you. Our hydraulic mining shovels are built with you in mind. Because in mining, every day matters and every load counts.

Benefits & Features

Product Specs

General Data

Engine Output - SAE J1995
Cat 3512C - 2240 kW (3,000 hp)
Standard Bucket Capacity
Face Shovel (heaped 2:1) - 34.0 m3 (44.5 yd3); Backhoe (heaped 1:1) - 34.0 m3 (44.5 yd3)
Operating Weight
Face Shovel - 569 tonnes (627 tons); Backhoe - 570 tonnes (628 tons)

Electrical System (diesel drive)

Batteries in series/parallel installation
6 × 210 Ah - 12V each; 630 Ah - 24V in total
Components
16 LED service lights
Components
Battery isolation relays and switches
Components
Emergency stop switches accessible from ground level and in engine module
Components
12 LED high-brightness working flood lights - 10 for working area - 2 for rear end
Components
2 LED high-brightness access flood lights
System voltage
24V

Operating Weight

6060 AC FS - Ground pressure
24.4 N/cm2 (35.4 psi)
6060 AC FS - Operating weight
1204370.0lb
6060 AC FS - Standard track pads
4.59ft
6060 AC - Ground pressure
24.5 N/cm2 (35.6 psi)
6060 AC - Operating weight
1207460.0lb
6060 AC - Standard track pads
4.59ft
6060 FS - Ground pressure
25.4 N/cm2 (36.8 psi)
6060 FS - Operating weight
1254200.0lb
6060 FS - Standard track pads
4.59ft
6060 - Ground pressure
25.5 N/cm2 (37.0 psi)
6060 - Operating weight
1257280.0lb
6060 - Standard track pads
4.59ft
Note
Other track pads available on request.

Operating Specifications

Bucket Payload
67.0tons
Operating Weight - Backhoe
628.0tons
Operating Weight - Front Shovel
627.0tons

Engine

Engine Model
2 × Cat® 3512C
Gross Power - SAE J1995
3000.0hp
Net Power - SAE J1349
3000.0hp
Note
Electric drive option available (1800 kW) on 6060 AC/6060 AC FS

Electric Motor - 6060 AC/6060 AC FS

Frequency
50 Hz (60 Hz on request)
Output
2414.0hp
Rated Current IN
194 A (at 6.6 kV)
Revolutions
1500 min-1 (1,800 min-1 at 60 Hz)
Starting current
350% of IN (197% of IN Optional)
Type
Squirrel cage induction motor
Voltage
6.6 kV ±10% (other on request)

Attachments

All buckets (FS and BH) are equipped with a wear package consisting of:
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
Shovel attachment with unique TriPower kinematics ensuring the following main features:
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features:
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features:
- Constant boom momentum throughout the entire lift arc - Crowd force assistance
Type
Catwalks with rails at booms
All buckets (FS and BH) are equipped with a wear package consisting of:
- Wing shrouds on side walls - Heel shrouds at bottom edges
Type
Special wear packages for highly abrasive materials on request
Type
Guards for shovel cylinders (FS)
Type
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type
Inspection holes in booms (FS and BH) and stick (FS)
Type
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type
Booms and sticks are stress-relieved after welding
Type
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas

Retractable Service Station

Installation
Retractable service station installed underneath the engine module and easily accessible from ground.

Diesel Engines

Alternators
2 × 150 A
Aspiration
Turbocharged and charge air-cooled
Bore
6.69in
Components
Additional high-capacity water separator
Components
Two-stage fuel filter including water separator
Components
Heavy-duty air filters
Components
Microprocessed engine management
Components
Hydraulically driven radiator fan with electronically controlled fan speed
Displacement
3574.0in3
Emissions
U.S. EPA flex
Fuel tank capacity
3435.0gal
Make and model
2 × Cat 3512C (Tier 2)
Maximum altitude without deration at 20° C (68° F) - above sea level
9800.0ft
Number of cylinders (each engine)
12
Stroke
8.46in
Total rated gross power - SAE J1995
2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
Total rated net power - ISO 3046/1
2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
Total rated net power - SAE J1349
2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)

Automatic Lubrication System

Capacity of grease container
264.0gal
Type
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type
System failures displayed by Board Control System
Type
Grease filters (200 μm) between service station and container as well as directly behind grease pump
Type
Connected to main lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage
Type
Connected to main lube system are: - raceways of swing roller bearing - 2 greasing pinions for the internal gearing of swing ring

Undercarriage

Bottom Rollers (each side)
7
Components
All running surfaces of sprockets, idlers, rollers & pad links, as well as teeth contact areas of sprocket & pad links, are hardened
Gradeability of travel drives - maximum
52.0%
Maximum tractive force
664300.0lb
Parking Brakes
Wet multiple-disc brake, spring applied/hydraulically released
Support Rollers (each side)
2 plus a skid plate in between
Track Pads (each side)
42
Travel Drives (each side)
1 planetary transmission with 2 two-stage axial piston motors
Travel Speed: 1st Stage (maximum)
0.87mph
Travel Speed: 2nd Stage (maximum)
1.24mph
Components
Acoustic travel alarm
Components
Cast double-grouser combined pad links with bushings connected by hardened full floating pins
Components
Bottom rollers are connected to the automatic lubrication system
Components
Fully hydraulic, self-adjusting track tensioning system with membrane accumulator
Components
Automatic hydraulic retarder valve to prevent over-speed on downhill travel

Operator’s Cab

Board Control System (BCS) Features:
Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system
Components
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
Internal dimensions of cab - Height
7.05ft
Internal dimensions of cab - Length
7.22ft
Internal dimensions of cab - Width
5.25ft
Operator’s eye level - approximately
24.93ft
Components
Under roof mounted heating ventilating and air conditioning system
Components
Windshield with parallel intermittent wiper/washer
Components
All-round safety glass, armored windshield and sliding side window
Components
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Components
Fold-away auxiliary seat with safety belt
Components
External sun shields at side and rear windows
Components
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components
Joystick controls integrated in independently adjustable seat consoles
Components
Robust instrument panel including large colored BCS screen with transflective technology
Components
Sliding emergency ladder (kick-down type) with ladder cage
Components
Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Components
Roller blinds at all windows

Hydraulic Oil Cooling

Components
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Diameter of fans
4 × 1170 mm (4 × 46 in)
Features
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Oil flow of cooling pumps
4 × 488 L/min (4 × 129 gal/min)
Features
Fan speed and flow of oil to the coolers are thermostatically controlled
Features
Extremely high cooling efficiency to ensure optimum oil temperature

Hydraulic System with Pump Managing System

Hydraulic tank capacity - AC version - approximately
1320.0gal
Hydraulic tank capacity - Diesel version - approximately
1876.0gal
Main pumps - AC version
4 × variable flow axial piston pumps
Main pumps - Diesel version
4 × swash plate double pumps
Main pumps - Maximum oil flow - AC version
4 × 933 L/min (4 × 246 gal/min)
Main pumps - Maximum oil flow - Diesel version
4 × 1300 L/min (4 × 343 gal/min)
Maximum pressure, attachment
4640.0psi
Maximum pressure, swing pumps
5365.0psi
Maximum pressure, travel
5365.0psi
Swing pumps - AC version
3 × reversible swash plate pumps
Swing pumps - Diesel version
4 × reversible swash plate pumps
Swing pumps - Maximum oil flow - AC version
3 × 491 L/min (3 × 131 gal/min)
Swing pumps - Maximum oil flow - Diesel version
4 × 352 L/min (4 × 93 gal/min)
Total volume of hydraulic oil - AC version - approximately
2483.0gal
Total volume of hydraulic oil - Diesel version - approximately
1930.0gal

Bucket

Bucket Capacity - Backhoe (heaped 1:1)
44.5yd3
Bucket Capacity - Front Shovel (heaped 2:1)
44.5yd3

Swing System

Features
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Maximum Swing Speed
3.8RPM
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
Swing Drives
4 compact planetary transmissions with axial piston motors
Swing Ring
Triple-race roller bearing with sealed internal gearing
Features
Closed-loop swing circuit with torque control
Features
Hydraulic braking of the swing motion by counteracting control
Features
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system

Worktool Attachments

Equipment

  • TriPower shovel attachment
  • Independent oil-cooling system
  • Spacious walk-through machine house
  • 5-circuit hydraulic system
  • On-board electronics system: Control and Monitoring Platform (CAMP)
  • Board Control System (BCS)
  • Torque control in closed-loop swing circuit
  • Automatic central lubrication system
  • LED working light

Optional Equipment

  • General
    • Custom paint
  • Superstructure
    • Hydraulic service crane on superstructure with auxiliary engine
    • Oil change interval extension for engine oil up to 500 hours
    • Two round containers for two standard 200 L (53 gal) barrels (instead of 1000 L (264 gal) grease container)
    • Filling of round containers via service station
    • Various cold-weather options
  • Cab
    • Dual (redundancy) heating ventilating and air conditioning system
    • Cab heating
    • Camera monitoring system
  • Undercarriage
    • Track pad width 1600 mm (5 ft 3 in) or 1800 mm (5 ft 11 in)
    • Cover plate under carbody (belly plate)
    • Additional optional equipment available on request.

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations