6030 AC Hydraulic Mining Shovel

6030 FS Hydraulic Mining Shovel

6030 AC Hydraulic Mining Shovel

Product Specs

Undercarriage

Components (1)
Cast double-grouser track pads with bushings connected by hardened full floating pins
Bottom Rollers - Each Side
7
Gradeability - Travel Drives - Approximate
50%
Components (2)
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Track Pads - Each Side
44
Components (5)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Components (3)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
Support Rollers - Each Side
2 plus a skid plate in between
Parking Brakes
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components (4)
1 planetary transmission with 2 two-stage axial piston motors
Travel Speed
2 Stages
Travel Speed - 1st Stage - Maximum
0.9mile/h
Travel Speed - 2nd Stage - Maximum
1.7mile/h
Maximum Tractive Force
367880lbf

Swing System

Features (1)
Swing circuit is closed-loop with torque control
Swing Ring
Triple-race roller bearing with sealed internal gearing
Maximum Swing Speed - AC Version
5r/min
Parking Brakes
Wet multiple-disc brake, spring-loaded/hydraulically released
Swing Drive
2 compact planetary transmissions with axial piston motors

Hydraulic Oil Cooling

Features (3)
Cooling system is fully independent
Diameter - Fan
48in
Features (2)
Fan speed is thermostatically controlled
Features (1)
2 Fans
Oil Flow of Cooling Pumps - AC Version
2 x 459 L/min (2 x 121 gal/min)

Hydraulic System with Pump Managing System

Maximum Pressure - Swing Pumps
5075psi
Swing Pumps - Maximum Oil Flow - AC Version
2 x 426 L/min (2 x 113 gal/min)
Swing Pumps
2 x reversible swash plate double pumps
Maximum Pressure - Travel
5220psi
Maximum Pressure - Attachment
4495psi
Main Pumps - Maximum Oil Flow - AC Version
4 x 543 L/min (4 x 143 gal/min)
Main Pumps
4 x variable swash plate pumps

Service Refill Capacities

Grease Tank
119gal (US)
Swing Drive
20gal (US)
Cooling System
25gal (US)
Hydraulic System - Including Tank
872gal (US)
Hydraulic Tank
745gal (US)

Operating Weights

6030 - Ground Pressure
31.7psi
6030 - Operating Weight
648810lb
6030 - Standard Track Pads
3.25ft
6030 FS - Operating Weight
648810lb
6030 FS - Ground Pressure
31.7psi
Note
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and lubricants.
6030 FS - Standard Track Pads
3.25ft

Electrical System

Batteries (12V each) - In Series/Parallel Installation - Cat Version
2 X 210 Ah 12 V each; 210 Ah 24 V in total
System Voltage
24 V

Electric Motor - 6030 AC/6030 AC FS

Starting current
350% of IN (197% of IN optional)
Revolutions
1,500 min-1 (1,800 min-1 at 60 Hz)
Frequency
50 Hz (60 Hz on request)
Rated Current IN
110 A (at 6.6 kV)
Voltage
6.6 kV ± 10% (other on request)
Type
Squirrel cage induction motor
Output
1000 kW

General

Operating Weight
324ton (US)
Note
Specifications shown above apply to Face Shovel configuration.
Bucket Payload
34ton (US)

Operator's Cab

Operator's Eye Level - Approximately
21.33ft
Internal Dimensions of Cab - Length
7.22ft
Internal Dimensions of Cab - Width
5.25ft
Internal Dimensions of Cab - Height
7.05ft
Components (1)
Under roof mounted heating ventilating and air conditioning system
Components (2)
External sun shields at side and rear windows
Components (3)
Robust instrument panel including large colored BCS screen with transflective technology
Components (4)
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
Components (5)
Powered 38° access ladder
Components (6)
Emergency egress safety harness
Components (7)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (8)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components (9)
Roller blinds at all windows
Components (10)
Windshield with parallel intermittent wiper/washer
Components (11)
All-round safety glass, armored windshield and sliding side window
Components (12)
Operator Protective Guard (Top Guard) (ISO 10262:1998 Level II)
Components (13)
Joystick controls integrated in independently adjustable seat consoles
Components (14)
Fold-away auxiliary seat with safety belt

Attachments

All buckets (FS and BH) are equipped with a wear package consisting of: (1)
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
Wing shrouds on side walls and heel shrouds at bottom edges
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
Horizontal automatic constant-angle bucket guidance €“ Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
Constant boom momentum throughout the whole lift arc and crowd force assistance
Type (1)
Catwalks with rails at booms
Type (2)
Special wear packages for highly abrasive materials on request
Type (3)
Pressure-free lowering of boom and stick by means of a float valve
Type (4)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (5)
Booms and sticks are stress-relieved after welding
Type (6)
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas

Bucket

Bucket Capacity - Face Shovel (heaped 2:1)
21.6yd³

Digging Forces

Maximum Crowd Force
291700lbf
Maximum Breakout Force
214390lbf

Working Ranges

Maximum Digging Height
45.6ft
Maximum Digging Reach
44.9ft
Maximum Digging Depth
8.2ft

Automatic Lubrication System

Capacity - Grease Container
120gal (US)
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
Type (2)
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
Type (3)
Lubricated pinion for greasing of internal gearing of swing ring
Type (4)
System failures displayed by Board Control System
Type (5)
Grease filters (200 µm) between service station and container as well as directly behind grease pump

Retractable Service Station

Installation
Retractable, easily accessible, ground-level service station installed underneath the engine module

Equipment

Optional Equipment

  • General
    • Export crating
    • Custom paint
  • Superstructure
    • Oil change interval extension for engine oil up to 1,000 hours
    • Hydraulic service crane on superstructure with auxiliary engine
    • Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) grease container)
    • Cold-weather package
  • Cab
    • Cab heating
    • Dual (redundancy) HVAC system
    • Camera monitoring system
    • Windshield guard (FOGS)
  • Undercarriage
    • Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
    • Cover plate under carbody (belly plate)

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations