304.5E2 XTC Mini Hydraulic Excavator with Xtra Tool Carrier

304.5E2 XTC Mini Hydraulic Excavator with Xtra Tool Carrier

304.5E2 XTC Mini Hydraulic Excavator with Xtra Tool Carrier

The Cat® 304.5E2 XTC Mini Excavator is the first model in the Xtra Tool Carrier (XTC) lineup and delivers efficient performance, durability and versatility in a compact design.

Product Specs

Engine

Net Power
40.2HP
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
40.2HP
Displacement
146in³
Stroke
4in
Gross Power - ISO 14396
41.8HP
Engine Model
Cat C2.4
Bore
3.4in

Weights

Weight - Canopy, Long Stick
8721lb
Weight - Cab, Standard Stick
8930lb
Operating Weight
8996lb
Weight - Cab, Long Stick
8996lb
Note
Weight includes counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines.
Weight - Canopy, Standard Stick
8655lb

Travel System

Gradeability - Continuous Operation
20°
Travel Speed - High
3.2mile/h
Ground Pressure - Canopy Standard Stick
4.2psi
Ground Pressure - Canopy Long Stick
4.2psi
Ground Pressure - Cab Standard Stick
4.3psi
Ground Pressure - Cab Long Stick
4.3psi
Gradeability - Maximum
30°
Travel Speed - Low
1.9mile/h
Maximum Traction Force - Low Speed
6969lb
Maximum Traction Force - High Speed
3799lb

Swing System

Note
*Automatic swing brake, spring applied, hydraulic release.
Boom Swing - Left - Without Stop*
80°
Boom Swing - Right
50°
Boom Swing - Left - With Stop*
55°
Machine Swing Speed
10r/min

Operating Specifications - Loader

Maximum Height - 1829 mm (72 in) MP Bucket with Cutting Edge
37in
Note
*Rated operating capacity based on hydraulic limit (ROC is the smaller of the hydraulic limit or 50% of the static tipping load).
Rated Operating Capacity* - Ground - 1829 mm (72 in) MP Bucket
1874lb
Rack Back Angle - Maximum Height - 1829 mm (72 in) MP Bucket
48°
Reach - Maximum Lift/Dump - 1829 mm (72 in) MP Bucket
80in
Rated Operating Capacity* - Maximum Height - 1829 mm (72 in) MP Bucket
1158lb
Maximum Dump Angle - 1829 mm (72 in) MP Bucket
27°
Lift Capacity - 1829 mm (72 in) MP Bucket
1158lb
Lift Capacity - 1070 mm (42 in) Forks
1323lb
Breakout Force - Tilt - 1829 mm (72 in) MP Bucket
1874lb
Breakout Force - Lift - 1829 mm (72 in) MP Bucket
1588lb

Operating Specifications

Stick Length - Long
64in
Machine Overhang
0in
Stick Length - Standard
52in

Lift Capacities at Ground Level (Standard Stick)* - Lift Point Radius: 4500 mm (177 in)

Blade Down - Side
1301lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Blade Up - Side
1169lb
Blade Up - Front
1169lb
Blade Down - Front
2293lb

Lift Capacities at Ground Level (Standard Stick)* - Lift Point Radius: 3000 mm (118 in)

Blade Up - Front
1830lb
Blade Down - Front
3550lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Blade Up - Side
1830lb
Blade Down - Side
2029lb

Lift Capacities at Ground Level (Long Stick)* - Lift Point Radius: 4500 mm (177 in)

Blade Up - Side
948lb
Blade Down - Side
1058lb
Blade Down - Front
1896lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Blade Up - Front
948lb

Lift Capacities at Ground Level (Long Stick)* - Lift Point Radius: 3000 mm (118 in)

Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Blade Up - Side
1808lb
Blade Up - Front
1808lb
Blade Down - Side
2007lb
Blade Down - Front
3462lb

Hydraulic System

Digging Force - Bucket
8498lb
Digging Force - Stick - Standard
4856lb
Digging Force - Stick - Long
4384lb
Operating Pressure - Equipment
3553psi
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Pump Flow at 2,200 rpm
26.4gal/min
Operating Pressure - Travel
3553psi
Operating Pressure - Swing
3132psi
Auxiliary Circuit - Secondary (174 bar/2,524 psi)
6.6gal/min
Auxiliary Circuit - Primary (245 bar/3,553 psi)
18.5gal/min

Dimensions - Standard Stick

O/A Track Width
77in
O/A Shipping Length
190in
Maximum Reach
211in
Maximum Dump Clearance
141in
Boom Swing - Left
26in
Boom In Reach
83in
Vertical Wall
95in
Track Belt/Shoe Width
14in
O/A Undercarriage Length
87in
Maximum Dig Height
196in
Maximum Blade Height
16in
Maximum Blade Depth
19in
Tail Swing
38in
Swing Bearing - Height
22in
O/A Shipping Height
98in
Maximum Reach - Ground Level
206in
Dig Depth
123in
Boom Swing - Right
29in
Boom Height - Shipping Position
58in

Dimensions - Long Stick

Track Belt/Shoe Width
14in
Tail Swing
38in
O/A Track Width
77in
Maximum Reach - Ground Level
215in
Boom Height - Shipping Position
70in
Boom Swing - Left
26in
Maximum Dig Height
200in
Swing Bearing - Height
22in
O/A Undercarriage Length
87in
Maximum Dump Clearance
145in
Maximum Blade Height
16in
Maximum Blade Depth
19in
Dig Depth
135in
Vertical Wall
101in
O/A Shipping Length
194in
O/A Shipping Height
98in
Maximum Reach
220in
Boom Swing - Right
29in
Boom In Reach
87in

Certification - Cab and Canopy

Top Guard
ISO 10262 (Level I)
Tip Over Protective Structure (TOPS)
ISO 12117
Roll Over Protective Structure (ROPS)
ISO 12117-2

Service Refill Capacities

Fuel Tank
15.1gal (US)
Cooling System
1.5gal (US)
Hydraulic System
15.3gal (US)
Hydraulic Tank
6.6gal (US)
Engine Oil
2.5gal (US)

Blade

Width
76.8in
Lift Height
15.7in
Dig Depth
18.5in
Height
12.8in

Undercarriage

Track Roller Type
Center Flange
Number of Track Rollers
4
Number of Carrier Rollers
1

Cab

Note
*European Union Directive “2000/14/EC”
Exterior Sound Power Level - ISO 6395:2008*
96dB(A)
Dynamic Operator Sound Pressure Level (ISO 6396:2008)
81dB(A)

Worktool Attachments

Equipment

  • Engine
    • Cat C2.4 diesel engine (meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards)
    • Automatic engine idle
    • Automatic engine shut-off
    • Automatic two speed travel
    • Diesel Particulate Filter (North America only)
    • Diesel Oxidation Catalyst (North America only)
    • Fuel and water separator
    • Power on demand
  • Hydraulic System
    • 1-way and 2-way (combined function)
    • Accumulator
    • Automatic swing parking brake
    • Auxiliary hydraulic lines
    • Auxiliary line quick disconnects
    • Cat interlock system: hydraulic lockout
    • Continuous auxiliary flow
    • Ecology drain
    • Hydraulic oil cooler
    • Load sensing/flow sharing hydraulics
  • Operator Environment
    • 100% pilot control ergonomic joysticks
    • Adjustable armrests
    • COMPASS: complete, operation, maintenance, performance and security system
      • Multiple languages
    • Cup holder
    • Hydraulic neutral lockout bar
    • Pattern changer (optional in Europe)
    • Site reference system: leveling
    • Tool storage area
    • Travel control pedals with hand levers
  • Undercarriage
    • Dozer blade with float function
    • Track, rubber belt, 350 mm (14 in) width
    • Tie down eyes on track frame
    • Towing eye on base frame
  • Front Linkage
    • 200 degree bucket rotation
    • Certified lifting eye on bucket linkage (optional in Europe)
    • Front shovel capable
    • Thumb ready stick
  • Electrical
    • 12 volt electrical system
    • 60 ampere alternator
    • 650 CCA maintenance free battery
    • Fuse box
    • Ignition key start/stop switch
    • Slow blow fuse
    • Warning horn
  • Lights And Mirrors
    • Boom light with time delay capability
  • Safety And Security
    • Anti-theft system (COMPASS)
    • Caterpillar Corporate “One Key” System
    • Door locks
    • Lockable fuel cap
    • Retractable seat belt
    • Roll Over Protective Structure (ROPS) (ISO 12117-2)
    • Tip Over Protective Structure (TOPS) (ISO 12117)
    • Top guard – ISO 10262 (Level 1)
    • Travel alarm (optional in Europe)

Optional Equipment

  • Engine
    • Engine block heater
  • Hydraulic System
    • Quick coupler lines
    • Boom lowering check valve
    • Stick lowering check valve
    • Secondary auxiliary hydraulic lines
  • Operator Environment
    • Cab:
      • Air conditioning
      • Heat
      • High back suspension seat
      • Interlocking front window system
      • Radio
      • Windshield wiper
  • Undercarriage
    • Track, double grouser (steel), 350 mm (14 in)
  • Performance Matched Work Tools
    • Quick coupler: manual or hydraulic
    • Thumb, manual or hydraulic
    • Buckets
    • Auger, hammer, ripper
    • Skid steer loader coupler: general purpose buckets, multi-purpose buckets, forks, dozer blades, brooms, power box rakes and trenchers
  • Lights And Mirrors
    • Light, cab with time delay capability
    • Mirror, canopy right
    • Mirror, canopy left
    • Mirror, cab rear
  • Safety And Security
    • Battery disconnect
    • Beacon socket
    • Front wire mesh guard
    • Rearview camera
    • Vandal guard
  • Technology
    • Product Link

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations