D8T Track-Type Tractor

D8T Track-Type Tractor (Large Dozer)

D8T Track-Type Tractor

The Cat D8T dozer has a long history of outstanding versatility, productivity and resale value. Because this bulldozer excels across a wide range of tasks, customers choose the D8T for everything from dozing, ripping, scraper work and land clearing to finish grading. And with features designed for even greater comfort, productivity and fuel efficiency, today’s D8T does even more to help you meet your business objectives.

Product Specs

Engine

Flywheel Power
354HP
Engine Power - 1,600 rpm - ISO 14396 (DIN)
Engine Power - 1,700 rpm - SAE J1995
363HP
Engine Power - 1,700 rpm - ISO 14396
359HP
Engine Power - 1,700 rpm - ISO 14396 (DIN)
364HP
Net Power - 1,900 rpm - ISO 9249/SAE J1349
354HP
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN)
317HP
Engine Model
Cat C15 ACERT™
Bore
5.4in
Stroke
6.75in
Displacement
928in³
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
Engine Power - Maximum - ISO 14396
359HP
Engine Power - Maximum - ISO 14396 (DIN)
364HP
Engine Power - Maximum - SAE J1995
363HP
Net Power - Rated - ISO 9249/SAE J1349
312HP
Net Power - Rated - ISO 9249/SAE J1349 (DIN)
317HP
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
Note (2)
No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs.
Note (3)
All nonroad Tier 4 Final, Stage IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (bio
Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Engine Power - 1,600 rpm - ISO 14396
394HP

Weights

Operating Weight
86900lb
Shipping Weight - Standard SU Blade
66300lb
Operating Weight - LGP
82496lb
Operating Weight - Standard
87600lb
Shipping Weight - LGP
68700lb
Note (1)
Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator.
Note (2)
Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, 965 mm (38 in) MS shoes, and operator.
Note (3)
Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes.
Note (4)
Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 965 mm (38 in) MS shoes.

Transmission

1 Forward
2.1mile/h
2 Forward
3.8mile/h
3 Forward
6.6mile/h
1 Reverse
2.8mile/h
2 Reverse
5mile/h
3 Reverse
8.8mile/h
1 Forward - Drawbar Pull
148200lb
2 Forward - Drawbar Pull
82300lb
3 Forward - Drawbar Pull
46250lb
3.0 Reverse
7.3mile/h
3.0 Forward
7mile/h
2.0 Reverse
4mile/h
Drawbar Pull - 1 Forward
148lb
Drawbar Pull - 2 Forward
81lb
Drawbar Pull - 3 Forward
44lb
1.0 Forward
2.2mile/h
2.0 Forward
4.1mile/h

Service Refill Capacities

Engine Crankcase*
10gal (US)
Power Train
41gal (US)
Final Drive - Each
3.3gal (US)
Roller Frames - Each
17.2gal (US)
Pivot Shaft Compartment
10.6gal (US)
Hydraulic Tank
19.8gal (US)
Fuel Tank
165gal (US)
Cooling System
22.7gal (US)
DEF Tank
6.3gal (US)
Note
*With oil filter

Hydraulic Controls

Pump Type
Piston-type, Variable Displacement
Pump Output - Steering
75gal/min
Pump Output - Implement
64gal/min
Tilt Cylinder Flow - Rod End Flow
35gal/min
Tilt Cylinder Flow - Head End Flow
45gal/min
Bulldozer Relief Valve Setting
3480psi
Tilt Cylinder Relief Valve Setting
3480psi
Ripper - Lift - Relief Valve Setting
3480psi
Ripper - Pitch - Relief Valve Setting
3480psi
Steering
5700psi
Note (1)
Steering Pump output measured at 2,364 rpm (pump speed) and 30 000 kPa (4,351 psi).
Note (2)
Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (3)
Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves.
Note (4)
Complete system consists of pump, tank, filter, oil cooler, valves, lines, and control levers.

Winches

Winch Model
PA 140OVS
Weight*
3947lb
Oil Capacity
4gal (US)
Increased Tractor Length
22.2in
Winch Case - Width
45.6in
Drum Width
12.6in
Flange Diameter
18in
Cable Ferrule Size - Length
2.76in
Cable Ferrule Size - Outside Diameter
2.36in
Drum Capacity - Optional Cable
193ft
Drum Capacity - Recommended Cable Size
276ft
Optimal Cable Size
1.25in
Recommended Cable Size
1.13in
Winch Length
56.3in
Note (1)
*Weight: Includes pump and operator controls.
Note (2)
Variable speed, hydraulically driven, dual braking system, three roller fairlead.

Undercarriage - LGP

Ground Clearance
24.1in
Ground Contact Area
9593in²
Ground Pressure (ISO 16754)
7.7psi
Grouser Height
3.1in
Length - Track on Ground
126in
Pitch
8.5in
Shoe Type
Moderate Service
Shoes/Side
44
Track Gauge
92in
Track Rollers - Each Side
8
Width - Shoe
38in

Operating Weights

LGP
83200lb
Standard
87600lb

Undercarriage - Standard

Ground Clearance
24.1in
Ground Contact Area
6060in²
Ground Pressure (ISO 16754)
13psi
Grouser Height
3.1in
Length - Track on Ground
126in
Pitch
8.5in
Shoe Type
Moderate Service
Shoes/Side
44
Track Gauge
82in
Track Rollers - Each Side
8
Width - Shoe
24in

Blades

8SU LGP - Capacity - SAE J1265
12.9yd³
8U - Capacity - SAE J1265
15.4yd³
8SU LGP - Width - Over End Bits
14.9ft
8A - Capacity - SAE J1265
6.8yd³
8A - Width - Over End Bits
16.5ft
8U - Width - Over End Bits
14ft
8SU - Width - Over End Bits
13.3ft
8SU - Capacity - SAE J1265
13.4yd³

Dimensions - Non-Suspended

Ground Clearance
23.8in
Ground Pressure (ISO 16754)
13psi
Length - Track on Ground
128.3in
Overall Length - Basic Tractor
183in
Machine Height - ROPS/FOPS Cab
140.7in
Width - Tractor - Without Trunnions - Standard Shoes
106in

Dimensions - LGP

Width - Tractor - Without Trunnions - Standard Shoes
130in
Machine Height - ROPS/FOPS Cab
140.4in
Ground Clearance
2401in
Ground Pressure (ISO 16754)
7.7psi
Overall Length - Basic Tractor
183in
Length - Track on Ground
126.2in

Dimensions - Standard

Width - Tractor - Without Trunnions - Standard Shoes
106in
Length - Track on Ground
126.2in
Ground Pressure (ISO 16754)
13psi
Ground Clearance
24.1in
Overall Length - Basic Tractor
183in
Machine Height - ROPS/FOPS Cab
140.4in

Dimensions

Note (1)
Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; A Blade (not angled) 2027 mm/79.8 in; A Blade (angled 2
Note (2)
When Cat Grade Control 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.

Weights - Waste Handler

Operating Weight - Standard
87400lb
Operating Weight - LGP
92300lb
Shipping Weight - Standard
73400lb
Shipping Weight - LGP
77900lb
Note (1)
Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, striker box, 610 mm (24 in) MS shoes, and operator.
Note (2)
Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, 965 mm (38 in) MS shoes, striker box, and operator.
Note (3)
Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 610 mm (24 in) MS shoes.
Note (4)
Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 965 mm (38 in) MS shoes.

Blades - 8A

Height
3.9ft
Digging Depth
24.6in
Ground Clearance
52.1in
Maximum Tilt
28.9in
Weight* - Without Hydraulic Controls
11900lb
Total Operating Weight** - With Blade and Single-Shank Ripper
88700lb
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Capacity - SAE J1265
6.8yd³
Width - Over End Bits
16.6ft

Blades - 8SU LGP

Capacity - SAE J1265
12.9yd³
Width - Over End Bits
14.9ft
Height
5.3ft
Digging Depth
20.2in
Ground Clearance
51.5in
Maximum Tilt
35.7in
Weight* - Without Hydraulic Controls
11150lb
Total Operating Weight** - With Blade and Single-Shank Ripper
82496lb
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades - 8 SU Landfill

Capacity - SAE J1265
25.6yd³
Width - Over End Bits
12.9ft
Height
8.1ft
Digging Depth
22.6in
Ground Clearance
50.7in
Maximum Tilt
35.1in
Weight* - Without Hydraulic Controls
7867lb
Total Operating Weight** - With Blade and Single-Shank Ripper
88800lb
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades - 8U Landfill

Capacity - SAE J1265
27.7yd³
Width - Over End Bits
13.9ft
Height
8.3ft
Digging Depth
22.3in
Ground Clearance
48.8in
Maximum Tilt
39.2in
Weight* - Without Hydraulic Controls
9450lb
Total Operating Weight** - With Blade and Single-Shank Ripper
90383lb
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Blades - 8 SU LGP Landfill

Capacity - SAE J1265
28.9yd³
Width - Over End Bits
14.9ft
Height
7.9ft
Digging Depth
20.2in
Ground Clearance
51.5in
Maximum Tilt
35.7in
Weight* - Without Hydraulic Controls
7734lb
Total Operating Weight** - With Blade and Single-Shank Ripper
83635lb
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.

Ripper - Multi-Shank, Adjustable Parallelogram

Total Operating Weight* - With SU-Blade and Ripper
86876lb
Note
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
23.35in
Maximum Penetration - Standard Tip
30.7in
Maximum Penetration Force - Shank Vertical
27920lb
Number of Pockets
3
Overall Beam Width
97in
Pry-Out Force - Multi-Shank Ripper with One Tooth
51230lb
Weight - Each Additional Shank
732lb
Weight - With One Shank
8681lb

Standards

Note (4)
The declared dynamic operator sound pressure level is 75 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engin
Note (5)
The declared exterior sound power level is 113 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008.” The measurement was conducted at 70% of the maximum engine cooling fan speed
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II.
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Brakes
Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008.
Note (1)
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engin
Note (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when th
Note (3)
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “European Union Directives” – The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate.

Blades - 8SU - Version 1

Capacity - SAE J1265
11.3yd³
Digging Depth
22.6ft
Ground Clearance
50.7in
Height
5.5in
Maximum Tilt
35.1lb
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper
86900ft
Weight* - Without Hydraulic Controls
10100lb
Width - Over End Bits
12.9in

Blades - 8SU - Version 2

Capacity - SAE J1265
13.4yd³
Digging Depth
22.8in
Ground Clearance
48.7in
Height
5.7ft
Maximum Tilt
36in
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper
86900lb
Weight* - Without Hydraulic Controls
10557lb
Width - Over End Bits
13.3ft

Blades - 8U

Capacity - SAE J1265
15.4yd³
Digging Depth
22.3in
Ground Clearance
48.8in
Height
5.7ft
Maximum Tilt
39.2in
Note (1)
*Includes blade tilt cylinder.
Note (2)
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper
88300lb
Weight* - Without Hydraulic Controls
11500lb
Width - Over End Bits
13.9ft

Ripper - Single-Shank, Adjustable Parallelogram

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
25in
Maximum Penetration - Standard Tip
44.4lb
Maximum Penetration Force - Shank Vertical
28620lb
Note
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Number of Pockets
1
Pry-Out Force
50070in
Total Operating Weight* - With SU-Blade and Ripper
86900lb
Weight* - Without Hydraulic Controls
8705lb

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Worktool Attachments

Equipment

  • Power Train
    • C15 ACERT Diesel Engine: – Electronic Unit Injection (EUI) – Aftertreatment – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • 24V electric start
    • High performance single plane cooling system
    • Aftercooler, air-to-air (ATAAC)
    • Air filter, with electronic service indicator
    • Coolant, extended life
    • Fan, suction, hydraulically driven
    • Fuel priming pump, electric
    • Sound attenuated exhaust system
    • Parking brake, electronic
    • Precleaner, strata-tube dust ejector
    • Prescreener
    • Shift management: – Automatic directional and downshift – Controlled-throttle, load-compensated – Enhanced Auto Shift
    • Starting aid, automatic ether
    • Torque divider
    • Transmission, electronically-controlled powershift, 3F/3R speed
    • Four planet, double-reduction planetary final drives
    • Transmission control module, electronic
    • Turbocharger
    • Water separator
  • Undercarriage
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage
    • 8-roller tubular track roller frame (Carrier roller ready)
    • Track adjusters, hydraulic
    • Track guide
    • 610 mm (24 in) PPR moderate service grouser with sealed and lubricated track (44 section)
    • Two-piece master links
  • Hydraulics
    • Hydraulics, independent steering and work tool pumps
    • Hydraulics, electronically controlled, load-sensing dozer lift and tilt
    • Electronically enabled quick drop valve
  • Starters, Batteries, And Alternators
    • Alternator, 150 amp
    • Batteries, heavy duty
    • Starting receptacle, auxiliary
  • Electrical
    • Alarm, back-up
    • Converter, 24V to 12V
    • Diagnostic connector
    • Ground level service center with hour meter
    • Horn, forward warning
  • Operator Environment
    • ROPS mounted air conditioner
    • Armrest, adjustable
    • Advisor operator interface: – Electronic monitoring system – Diagnostic service information – Operator preferences
    • Cab, ROPS/FOPS, sound suppressed
    • Deactivation switch, hydraulic controls
    • Access/egress lighting with shutdown timer
    • Decelerator pedal
    • Governor switch, electronic
    • Heater and ventilation
    • Mirror, rearview
    • Radio-ready
    • Provision for wire passage in/out of cab
    • Interior LED courtesy lights
    • Seat, cloth, air-suspension
    • Seat belt, retractable
    • Steering control, direction and speed control thumb switches with recall button
    • Wipers, intermittent
  • Other Standard Equipment
    • CD ROM Parts Book
    • Engine enclosures
    • Equalizer bar, pinned
    • Front pull device
    • Guards, bottom hinged
    • Grade control ready
    • HVAC box – corrosive resistant
    • Mounting, lift cylinders
    • Oil cooler, hydraulic
    • Product Link
    • S·O·S sampling ports
    • Steering, electronically controlled power differential
    • Vandalism protection for fluid compartments
    • Engine compartment service light
    • Six lights package

Optional Equipment

  • Electrical
    • Light, warning strobe
    • Mount, light, warning strobe
  • Guards
    • Guard, fuel tank
    • Guard, fast fuel
    • Guard, fan debris
    • Guard, grill debris
    • Sweeps group
    • Striker bars, front
    • Striker bars, front, suspended
    • Rear screen
  • Other Attachments
    • Drains, ecology, power train
    • Fan speed, low, cold weather
    • Grab handles, push arm
    • Counterweight, additional
    • Black paint, blade
    • Window shades
    • PA140VS winch
    • W12 E PTO winch
  • Lift Cylinders
    • Basic
    • GRADE with 3D
    • AutoCarry
  • Bulldozers
    • 8SU/U – basic, guarded or dual tilt guarded
    • 8SU LGP – basic
    • 8 LGP – single tilt guarded or dual tilt guarded
    • 8A
  • Push Arms
    • Single tilt, standard or extreme
    • Dual tilt, standard or extreme
  • Ripper Shank Teeth
    • Multi-shank
    • Single shank
    • Single shank, deep ripping
  • Blades
    • 8SU (10.3 m3/13.4 yd3): – With performance cutting edges and end bits – With performance cutting edges and end bits, plus rock guard and wear plate
    • 8SU – basic: – With rock guard and wear plate – With push plate – With landfill wear plate – LGP – LGP landfill
    • 8U – basic: – With rock guard and wear plate – With landfill wear plate
    • 8A

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations