D7E WH Waste Handler

D7E WH

Learn More About This Piece of Equipment

Videos

Benefits & Features

Product Specs

Engine

Engine Model
Cat® C9.3 ACERT™
Flywheel Power
251hp
Bore
4.5in
Stroke
5.9in
Displacement
567in3
Global Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Engine Power (Maximum) – SAE J1995
270hp
Engine Power (Maximum) – ISO 14396
266hp
Engine Power (Maximum) – ISO 14396 (DIN)
270hp
Net Power (Rated) – ISO 9249/SAE J1349
238hp
Net Power (Rated) – ISO 9249/SAE J1349 (DIN)
241hp
Net Power (Maximum) – ISO 9249/SAE J1349
251hp
Net Power (Maximum) – ISO 9249/SAE J1349 (DIN)
254hp
Note
Rated power occurs at 1,700 rpm. Maximum power occurs at 1,600 rpm.

Weights

Operating Weight
71455lb
Shipping Weight
59456lb
Operating Weight – LGP S WHA
69478lb
Operating Weight – LGP U WHA
71455lb
Note
Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track and 10% fuel.
Note
Operating Weight includes blade, lubricants, coolant, full fuel tank, standard track, striker box and operator.

Standards

ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II
Brakes
Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008

Service Refill Capacities

Cooling System
22.5gal
Engine Crankcase
8gal
Final Drives (each)
7gal
Pivot Shaft Compartment
1.8gal
Power Train
16gal
Fuel Tank
113.5gal
DEF Tank
4.75gal
Roller Frames (each)
11gal
Hydraulic Tank
20gal

Drive Train

AC Compressor Maximum Input Current
12Amps
AC Compressor Nominal Input Voltage
320Volts
AC Generator and Propulsion Module Voltage
480Volts
Note
Nominal current dependent on heat/humidity loading on HVAC unit.
Type
Electric Drive

Bulldozer Specifications – 7S LGP Blade

Blade Capacity (SAE J1265)
25yd3
Width (over end bits)
15.1ft
Height
8ft
Digging Depth
24.8in
Ground Clearance
50.9in
Maximum Tilt
30.9in
Weight*
8875lb
Note
*Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).

Bulldozer Specifications – 7U LGP Blade

Blade Capacity (SAE J1265)
30yd3
Width (over end bits)
15.4ft
Height
8ft
Digging Depth
27.3in
Ground Clearance
52.6in
Maximum Tilt
30.9in
Weight*
11645lb
Note
*Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).

Undercarriage

Type
Heavy Duty Undercarriage
Configuration
LGP
Number of Rollers (each side)
8
Number of Shoes (each side)
44
Pitch
8.5in
Shoe Width
36in
Grouser Height (MS)
2.75in
Length of Track on Ground (Heavy Duty)
136in
Track Gauge
90in
Ground Contact Area (Heavy Duty)
9792in2
Ground Pressure (Heavy Duty) – ISO 16754
6.4psi
Ground Clearance
18.6in

Dimensions – LGP (Approximate)

Track Gauge
90in
Width of Tractor over Trunnions
135in
Width of Tractor without Trunnions (std. shoes)
126in
Machine Height from Tip of Grouser – Top of Stack
132in
Machine Height from Tip of Grouser – Top of Standard Cab
134in
Machine Height from Tip of Grouser – From Ground Face of Shoe
131in
Length of Track on Ground
136in
Length of Basic Tractor
181in
Length of Basic Tractor – With the following attachment add to basic tractor length: Ripper (with tip at ground line)
N/A
Length of Basic Tractor – With the following attachment add to basic tractor length: Ripper (with tip fully raised)
N/A
Length of Basic Tractor – With the following attachment add to basic tractor length: Drawbar
10.6in
Length of Basic Tractor – With the following attachment add to basic tractor length: S Blade
53.5in
Length of Basic Tractor – With the following attachment add to basic tractor length: U Blade
76.6in
Height of Grouser
2.75in
Ground Clearance
18.6in
Ground Contact Area (std. shoes)
9792in2
Number of Shoes per Side
44
Standard Shoe Width (Moderate Service)
36in
Ground Pressure
6.4psi
Pitch
8.5in
Track Rollers/Side
8
Number of Carrier Rollers
2
Drawbar Height (grouser tip to center of clevis)
28in

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg of refrigerant which has a CO2 equivalent 1.716 metric tonnes.

Worktool Attachments

Equipment

  • Electrical
    • Accessory Power Converter (APC)
    • Alarm, Backup
    • Batteries, Heavy Duty
    • Converter, 24V to 12V, 10 Amp
    • Heater, Engine Coolant, 120V
    • Horn, Forward Warning
    • Product Link
  • Operator Environment
    • Enhanced Clean Cab
    • Air Suspension Seat
    • Cab Door Screens
    • Armrest, Adjustable
    • Bidirectional Shift Switch
    • Center Post Cab, ROPS/FOPS
    • Continuously Variable Speed Control
    • Differential Steering
    • Electro-Hydraulic Controls
    • Electronic Monitoring System
    • Foot Supports, Dash
    • Hour Meter, Electronic
    • Machine Isolation, Operator Not Present
    • Mirror, Rearview
    • Modular HVAC, Cab Mounted
    • Radio Ready, 12V
    • Seat Belt, Retractable 76 mm (3")
    • Speed Recall Button
    • Throttle Dial, Electronic
    • Tilt Cab and Tilt Cab Jack
    • Travel Control Pedal
    • Wipers, Intermittent
  • Power Train
    • Final Drive Flange Protection Guards
    • Final Drive Clamshell Guard
    • Engine Thermal Shields
    • Heavy Duty Final Drive Flange Guards
    • Aftercooler
    • Air Cleaner, Precleaner with Strata Tube Dust Ejector
    • C9.3 ACERT Engine – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • Continuously Variable Speed Transmission
    • Coolant, Extended Life
    • Drains, Ecology, Power Train
    • Electronic Air Cleaner Service Indicator
    • Fan, Hydraulically Driven Demand
    • Final Drives, Double Reduction
    • Fuel Priming Pump, Electronic
    • Parking Brake, Electronic
    • Starting Aid, Ether
    • Water Cooled Turbocharger, Wastegated
    • Water Separator
    • Reversing Fan
  • Undercarriage
    • Heavy Duty Track (660 mm/26" MS Trap)
    • Heavy Duty Track (914 mm/36" MS Trap)
    • Guards, End Track Guiding
    • Idler Guards
    • Master Link
    • Idler Seal Guards, Kevlar Design
    • Track Roller Frame Debris Guard
    • Rollers and Idlers, Lifetime Lubricated
    • Sprocket Rim Segments, Replaceable
    • Track Adjusters, Gas Spring Recoil
    • Grease Track Adjust
    • Guard Group, Track Guide
  • Other Standard Equipment
    • Fenders, Heavy Duty
    • Chassis Guarding on Mainframe
    • Seal Guard Group
    • Crankcase Guard Group
    • Fuel Tank Guards
    • Dozer Lines Guards
    • Black Hood and Dozer Lift Cylinder
    • Screen, Grill Door
    • CD ROM Parts Book
    • Engine Enclosures, Perforated
    • Front Tow Hook
    • Grade Control Ready
    • Guards, Hinged Bottom
    • Hood, Perforated
    • Hydraulics, Load Sensing, Dozer Lift and Tilt
    • Oil Cooler, Hydraulic
    • S·O·SSM Sampling Ports
    • Radiator Doors, Louvered, Double Hinged
    • Vandalism Protection for Fluid Compartments and Battery Box
    • Insulated Clean Emissions Module

Optional Equipment

  • AccuGrade Ready Installation
  • Arrangement
  • Back of Blade, Black
  • Cold Weather Attachments
  • Engine Coolant Heater, 240V
  • Fast Fuel
  • Heavy Duty Final Drive Flange Guards
  • Rear Screen
  • Heated Seat
  • Lights
    • Basic (6) Lights
    • Premium (10) HID and Halogen Lights
  • Power Train Oil Change System
  • Rear Vision Camera
  • Rear Striker Box or Multi-shank Ripper with Striker Bar and Ripper Hydraulics
  • Sound Suppression (Europe)
  • Track Guide Guards
  • Landfill Bulldozer Blades – With Trash Racks
    • LGP S
    • LGP U
  • Heavy Duty Track (660 mm/26" ES Trap)
  • Heavy Duty Track (914 mm/36" ES Trap)

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations