D6T Track-Type Tractor

D6T Medium Dozer

D6T Track-Type Tractor

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Product Specs

Engine

Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm
245HP
Net Power - 2,200 rpm - ISO 9249/SAE J1349
215HP
Build Number
19
Engine Model
Cat C9.3 ACERT™
Flywheel Power
215HP
Displacement
567in³
Emissions
U.S. EPA Tier 4 Final
Note (1)
All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Operating Weights

LGP VPAT
54526lb
LGP A
53829lb
LGP S
51385lb
XL A
47846lb
XL SU
47138lb
XL VPAT
53042lb
XW A
49797lb
XW SU
48909lb
XW VPAT
54045lb
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

LGP VPAT - Blade
6.57yd³
LGP A-Blade
6.46yd³
LGP S-Blade
4.96yd³
XL A - Blade
5.17yd³
XL SU - Blade
7.26yd³
XL VPAT - Blade
6.07yd³
XW A - Blade
5.69yd³
XW SU - Blade
7.38yd³
XW VPAT - Blade
6.57yd³

Blades - Width

XL SU - Blade
10.7ft
XL A - Blade
13.7ft
XL VPAT - Blade
12.7ft
XW SU - Blade
11.7ft
XW A - Blade
14.8ft
XW VPAT - Blade
13.7ft
LGP S-Blade
13.3ft
LGP A-Blade
16.6ft
LGP VPAT - Blade
13.7ft

Dimensions - XL VPAT

Length - Basic Tractor(2)
16.08ft
Ground Clearance
15in
Ground Pressure (ISO 16754)(3)
9.78psi
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Track on Ground
9.25ft
Machine Height - To Product Link Antenna(1)
10.67ft
Width - Tractor - Without Trunnions - Standard Track
8.92ft

Dimensions - XW VPAT

Width - Tractor - Without Trunnions - Standard Track
9.83ft
Machine Height - To Product Link Antenna(1)
10.83ft
Length - Track on Ground
10.67ft
Length - Basic Tractor(2)
16.42ft
Ground Clearance
16in
Ground Pressure (ISO 16754)(3)
6.92psi
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP VPAT

Width - Tractor - Without Trunnions - Standard Track
10.33ft
Machine Height - To Product Link Antenna(1)
10.83ft
Length - Track on Ground
10.67ft
Length - Basic Tractor(2)
16.42ft
Ground Clearance
16in
Ground Pressure (ISO 16754)(3)
6.28psi
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Service Refill Capacities

Fuel Tank
97.2gal (US)
Cooling System
12.2gal (US)
Engine Crankcase
6.5gal (US)
Power Train
39.1gal (US)
Final Drive - Each
3.6gal (US)
Hydraulic Tank
16.5gal (US)
Roller Frames - Each
6.6gal (US)
Pivot Shaft Compartment
1.3gal (US)
DEF Tank
4.5gal (US)

Weights

Operating Weight
47138lb

Dimensions - LGP

Ground Clearance
16in
Ground Pressure (ISO 16754)(3)
5.11psi
Length - Basic Tractor(2)
14.5ft
Length - Track on Ground
10.67ft
Machine Height - To Product Link Antenna(1)
10.83ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
10.5ft

Dimensions - XL

Ground Clearance
15in
Ground Pressure (ISO 16754)(3)
8.66psi
Length - Basic Tractor(2)
13.83ft
Length - Track on Ground
9.25ft
Machine Height - To Product Link Antenna(1)
10.67ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
8ft

Dimensions - XW

Ground Clearance
15in
Ground Pressure (ISO 16754)(3)
6.64psi
Length - Basic Tractor(2)
13.83ft
Length - Track on Ground
9.25ft
Machine Height - To Product Link Antenna(1)
10.67ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
9.17ft

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations