Cat® D6N WH Waste Handler
Cat® D6N WH Waste Handler
From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.
Learn More About This Piece of Equipment

Product Specs
Engine
- Net Power - Maximum - ISO 14396 (DIN) at 2,200 rpm
- 180HP
- Engine Model
- Cat C7.1 ACERT™
- Flywheel Power
- 182HP
- Bore
- 4.1in
- Stroke
- 5.3in
- Displacement
- 433in³
- Net Power - 1,800 rpm - ISO 9249/SAE J1349
- 166HP
- Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
- 168HP
- Net Power - Maximum - ISO 14396 at 2,200 rpm
- 178HP
- Net Power - Maximum - SAE J1995 at 2,200 rpm
- 182HP
- Emissions
- Tier 4 Final/Stage IV/Korea Tier 4 Final
- Note (1)
- All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are a
- Note (2)
- Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
- Note (3)
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Blades - Width - Over End Bits
- XL VPAT Landfill*
- 10.23ft
- XL VPAT
- 10.75ft
- XL SU
- 10.33ft
- LGP VPAT - Landfill*
- 12.89ft
- LGP VPAT
- 13.38ft
- Note
- *Blade capacity with trash rack.
Weights
- Operating Weight
- 40818lb
- Operating Weight - LGP Waste Handler
- 44749lb
- Operating Weight - XL Waste Handler
- 40818lb
- Shipping Weight - LGP Waste Handler
- 43642lb
- Shipping Weight - XL Waste Handler
- 40029lb
Dimensions - LGP
- Ground Clearance
- 18.8in
- Ground Pressure
- 4.5psi
- Height - Grouser
- 2.2in
- Length - Basic Tractor - With Drawbar*
- 166.2in
- Length - Track on Ground
- 122.7in
- Machine Height - Grouser Tip - Exhaust Stack
- 126.9in
- Note
- *Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
- Track Gauge
- 85in
- Width - Tractor - Without Trunnions
- 118in
Dimensions - XL
- Ground Clearance
- 14.3in
- Ground Pressure
- 6.7psi
- Height - Grouser
- 2.6in
- Length - Basic Tractor - With Drawbar*
- 157.3in
- Length - Track on Ground
- 101.6in
- Machine Height - Grouser Tip - Exhaust Stack
- 122.4in
- Note
- *Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
- Track Gauge
- 74.4in
- Width - Tractor - Without Trunnions
- 98.4in
Blades - Capacity (SAE J1265)
- LGP VPAT
- 5.1yd³
- LGP VPAT - Landfill*
- 7.39yd³
- Note
- *Blade capacity with trash rack.
- XL SU
- 5.6yd³
- XL VPAT
- 4.3yd³
- XL VPAT Landfill*
- 8.29yd³
Transmission
- 0.5 Forward
- 1.6mile/h
- 0.5 Reverse
- 1.9mile/h
- 0.7 Forward
- 1.7mile/h
- 0.7 Reverse
- 2.1mile/h
- 1.5 Forward
- 2.7mile/h
- 1.5 Reverse
- 3.4mile/h
- 1.7 Forward
- 3mile/h
- 1.7 Reverse
- 3.7mile/h
- 2.5 Forward
- 4.7mile/h
- 2.5 Reverse
- 5.9mile/h
- 2.7 Forward
- 5.2mile/h
- 2.7 Reverse
- 6.5mile/h
- 1.0 Forward
- 2.1mile/h
- 2.0 Forward
- 3.6mile/h
- 3.0 Forward
- 6.1mile/h
- 1.0 Reverse
- 2.5mile/h
- 2.0 Reverse
- 4.4mile/h
- 3.0 Reverse
- 7.6mile/h