914M Compact Wheel Loader

914M Compact Wheel Loader

Benefits & Features

Product Specs

Engine

Maximum Gross Power: Maximum Engine Speed
2350RPM
Net Power
97hp
Engine Model
Cat C4.4 ACERT™
Maximum Gross Power: SAE J1995
102hp
Maximum Gross Power: ISO 14396
100hp
Maximum Gross Power: ISO 14396 (DIN)
101hp
Rated Net Power: Rated Engine Speed
2200RPM
Rated Net Power: SAE J1349
96hp
Rated Net Power: ISO 9249
97hp
Rated Net Power: ISO 9249 (DIN)
98hp
Maximum Gross Torque: SAE J1995
336lbf-ft
Maximum Gross Torque: ISO 14396
332lbf-ft
Maximum Net Torque: SAE J1349
325lbf-ft
Maximum Net Torque: ISO 9249
329lbf-ft
Displacement
268in3
Bore
4.13in
Stroke
5.00in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power
100hp

Weights

Operating Weight
19315lb

Operating Specifications

Rated Bucket Capacity
2.5yd3

Service Refill Capacities

Cooling System
5.7gal
Fuel Tank
40.7gal
Hydraulic System (including tank)
25.9gal
Engine Crankcase
2.3gal
Axles: Front Center Differential
2.0gal
Axles: Rear Center Differential
2.0gal
Hydraulic Tank
14.5gal
Diesel Exhaust Fluid (DEF) Tank
5.0gal
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
0.9gal

Buckets

Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)

Steering

Steering Articulation Angle (each direction)
40degrees
Maximum Flow – Steering Pump
22gal/min
Maximum Working Pressure – Steering Pump
3263psi
Steering Cycle Times (full left to full right): At 2,350 RPM: 90 RPM steering wheel speed
2.8seconds
Number of Steering Wheel Turns – full left to full right or full right to full left
3.75turns

Loader Hydraulic System

Maximum Flow – Implement Pump
39gal/min
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, Standard
24gal/min
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, High
32gal/min
Maximum Flow – Implement Pump: 4th Function, Maximum Flow
24gal/min
Maximum Working Pressure – Implement Pump
4061psi
Relief Pressure – Tilt Cylinder
4931psi
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
3046psi
Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure
3046psi
Hydraulic Cycle Times: Raise (ground level to maximum lift)
5.2seconds
Hydraulic Cycle Times: Dump (at maximum reach)
1.4seconds
Hydraulic Cycle Times: Rack Back
2.2seconds
Hydraulic Cycle Times: Float Down (maximum lift to ground level)
3.7seconds
Hydraulic Cycle Times: Total Cycle Time
12.5seconds

Transmission

Forward and Reverse: Low Range, Speed Range 1*
6.3mph
Forward and Reverse: Low Range, Speed Range 2*
12.5mph
Forward and Reverse: High Range
25mph
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Tires

Standard Size
17.5-25 12PR
Other Choices Include:
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport™
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note
*The measurements were conducted with the cab doors and windows closed.

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)

Worktool Attachments

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations