910M Compact Wheel Loader

910M Compact Wheel Loader

910M Compact Wheel Loader

Product Specs

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)

Operating Specifications

Rated Bucket Capacity
2.5yd³

Engine

Maximum Gross Torque - SAE J1995
336ft·lbf
Bore
4.13in
Rated Net Power - ISO 9249
97HP
Stroke
5in
Rated Net Power - ISO 9249 (DIN)
98HP
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Net Torque - SAE J1349
325ft·lbf
Maximum Net Torque - ISO 9249
329ft·lbf
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
332ft·lbf
Displacement
268in³
Maximum Gross Power
100HP
Rated Net Power - SAE J1349
96HP
Maximum Gross Power - SAE J1995
102HP
Rated Net Power - Rated Engine Speed
2200r/min
Maximum Gross Power - Maximum Engine Speed
2350r/min
Maximum Gross Power - ISO 14396 (DIN)
101HP
Net Power
97HP
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396
100HP

Cab

Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach
1.4s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046psi
Relief Pressure - Tilt Cylinder
4931psi
Maximum Working Pressure - Implement Pump
3408psi
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24gal/min
Maximum Flow - Implement Pump
32gal/min
Hydraulic Cycle Time - Total Cycle Time
12.5s
Hydraulic Cycle Time - Rackback
2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7s

Service Refill Capacities

Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Axles - Front Center Differential
2gal (US)
Hydraulic Tank
14.5gal (US)
Transmission
0.9gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential
2gal (US)
Hydraulic System - Including Tank
25.9gal (US)
Engine Crankcase
2.3gal (US)
Fuel Tank
40.7gal (US)
Cooling System
5.7gal (US)

Tires

Other Choices Include
15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size
15.5-25 12PR
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.

Transmission

Forward and Reverse - High Range
25mile/h
Forward and Reverse - Low Range, Speed Range 1*
6.3mile/h
Forward and Reverse - Low Range, Speed Range 2*
12.5mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Steering

Maximum Flow - Steering Pump
17gal/min
Maximum Working Pressure - Steering Pump
2683psi
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75turns
Steering Articulation Angle - Each Direction
40°
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2s

Buckets

Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)

Weights

Operating Weight
17893lb

Worktool Attachments

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations