-
Aftertreatment Dimensions
Height
25.7 inWeight
591 lbWidth
43.8 in -
Aftertreatment Dimensions*
Diameter
13 in -
Emission Standards
Emissions
U.S. EPA Tier 4 Final, EU Stage V, China Nonroad Stage IV -
General
Aftertreatment
DOC+DPF+SCRAspiration
Turbocharged Aftercooled (TA)Bore
5.7 inCompression Ratio
16.0:1Displacement
1104.5 in³Engine Configuration
Inline 6, 4-Stroke-Cycle DieselRotation from Flywheel End
CounterclockwiseStroke
7.2 in -
PETU Dimensions - Tier 4 Final Only
Height
21.7 inLength
33.6 inVolume Capacity
51.1 qt (US)Weight
42.8 lbWidth
11.3 in -
Power Rating
Maximum Power
630 HPMaximum Torque
2177 lb-ft @ 1300 rpmMinimum Power
575 HPRated Speed
1800-2000 rpm -
Power Unit Dimensions
Height
79 inLength
99.7 inWeight
5842 lbWidth
48.9 in
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Remote fan control
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
Cooling System
- Thermostats and housing, vertical outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
Fuel System
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
Power Take Off (PTO)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
General
- Paint: Caterpillar yellow, with optional colors available at request
U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems