-
Emission Standards
Emissions
China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified -
Engine Dimensions - Approximate
Height
49.5 inLength
55.7 inWeight - Net Dry - Basic Operating Engine Without Optional Attachments
3688 lbWidth
38.3 in -
General
Aftertreatment
-Aspiration
Turbocharged Aftercooled (TA)Bore
5.7 inCombustion System
Direct InjectionCompression Ratio
16.3:1Displacement
1104.5 in³Engine Configuration
Inline 6, 4-Stroke-Cycle DieselRotation from Flywheel End
CounterclockwiseStroke
7.2 in -
Power Rating
Maximum Power
800 HPMaximum Torque
2696 lb-ft @ 1400 rpmMinimum Power
575 HPRated Speed
1800-2100 rpm
Air Inlet System
- Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
- Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
- Air-to-Air Aftercooled
Charging System
- Charging alternator 24 volt, 50 amp
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
Flywheels and Flywheel Housing
- SAE No. 1 or SAE No. 0 flywheel housing
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel filter, tertiary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request