Net Power | 699 HP |
Engine Model | Cat® C27 ™ |
Bore | 5.4 in |
Stroke | 6 in |
Displacement | 1649.5 in³ |
Torque Rise | 18 % |
Rated Speed | 1,800/min |
Rated Speed - Gross - ISO 14396 | 752 HP |
Gross - ISO 14396 | 752 HP |
Net Power - SAE J1349 | 699 HP |
Rated Speed - Net Power - SAE J1349 - Standard Ambient | 699 HP |
Rated Speed - Net Power - SAE J1349 - High Ambient | 648 HP |
Peak Torque - 1,200 rpm | 2624 lb/ft |
Rated Speed - Gross - SAE J1995 | 766 HP |
Emissions | U.S. EPA Tier 4 Final or Tier 2 equivalent |
Operating Weight | 202398 lb |
Tipping Load - Straight | 92990 lb |
Tipping Load - Articulated 35° | 81896 lb |
Transmission Type | Cat-Planetenlastschaltgetriebe |
Forward - 1 | 4.5 mile/h |
Forward - 2 | 8.3 mile/h |
Forward - 3 | 14.2 mile/h |
Reverse - 1 | 4.9 mile/h |
Reverse - 2 | 9.1 mile/h |
Reverse - 3 | 15.5 mile/h |
Direct Drive - Forward 3 | 15.2 mile/h |
Direct Drive - Forward 1 | Lock-up disabled |
Direct Drive - Reverse 3 | 16.4 mile/h |
Direct Drive - Reverse 1 | 5.4 mile/h |
Direct Drive - Reverse 2 | 9.6 mile/h |
Direct Drive - Forward 2 | 8.5 mile/h |
Note | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
Maximum Flow at 1,800 rpm (1) | 216 gal/min |
Lift/Tilt System - Circuit | Positive flow control |
Relief Valve Setting - Lift/Tilt | 4786 psi |
Maximum Flow at 1,800 rpm (2) | 22.2 gal/min |
Relief Valve Setting - Main | 507 psi |
Pilot System | Open loop and pressure reducing |
Lift/Tilt System | Variable displacement piston |
Cylinders, Double Acting - Tilt, Bore and Stroke | 317.5 mm × 819 mm (12.5 in × 32.2 in) |
Cylinders, Double Acting - Lift, Bore and Stroke | 254 mm × 1264 mm (10.0 in × 49.8 in) |
Raise | 9.4 s |
Dump | 2.9 s |
Lower Float Down | 3.6 s |
Lower | 3.7 s |
Rack Back | 4.8 s |
Fuel Tank | 294.3 gal (US) |
Cooling System | 54.9 gal (US) |
Transmission | 29.1 gal (US) |
Hydraulic Tank - Steering and Braking | 34.9 gal (US) |
Differential - Final Drives - Rear | 68.9 gal (US) |
Engine Crankcase | 20 gal (US) |
Differential - Final Drives - Front | 71.6 gal (US) |
Hydraulic Tank - Implement and Hydraulic Fan | 68.9 gal (US) |
Hydraulic System Factory Fill | 210 gal (US) |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | 8.5° |
Brakes | SAE J1473 OKT90, ISO 3450:1992 |
Relief Valve Setting - Steering | 4641 psi |
Maximum Flow at 1,400 rpm | 94.5 gal/min |
Steering System - Circuit | Pilot, load sensing |
Total Steering Angle | 70° |
Steering System - Pump | Piston, variable displacement |
Machine Sound Level (ISO 6395:2008) | 115 dB(A) |
Operator Sound Level (ISO 6396:2008) | 69 dB(A) |
Operator Sound Level (ISO 6396:2008) | 69 dB(A) |
Machine Sound Level (ISO 6395:2008) | 113 dB(A) |
Ground to Top of Exhaust Stacks | 16.6 ft |
Fork Height at Maximum Lift | 18.3 ft |
Ground to Top of Hood | 12.7 ft |
Ground to Top of ROPS | 17.2 ft |
Fork Top Clamp Opening | 12.3 ft |
Maximum Overall Length | 45.4 ft |
Ground to Lower Hitch Clearance | 2 ft |
Ground to Bumper Clearance | 3.1 ft |
Fork Height with Level Arms | 8.9 ft |
Front Axle Centerline to Fork Tip | 17.6 ft |
Rear Axle - Centerline to Bumper | 12.5 ft |
Ground to Center of Front Axle | 3.9 ft |
Hinge Pin Height at Maximum Lift | 19.4 ft |
Wheel Base | 15.1 ft |
Dump Angle at Maximum Lift | 29.3 degrees |
Fork End Area | 78 ft² |