New CAT Equipment

950M Wheel Loader | Front Loader | Tier 4

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.

Get a Quote

Learn more about the 950M Wheel Loader | Front Loader | Tier 4

Watch

Product Specs

Engine

Net Power - ISO 9249 250 HP
Emissions Tier 4/Stage V
Maximum Power - 2,100 rpm - ISO 14396 249 HP
Peak Gross Torque - 1,300 rpm - SAE J1995 911 ft·lbf
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric 232 HP
Maximum Power - 2,100 rpm - SAE J1995 250 HP
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Maximum Net Power - 2,100 rpm - ISO 9249 230 HP
Peak Gross Torque - 1,300 rpm - ISO 14396 908 ft·lbf
Displacement 428 in³
Maximum Net Power - 2,100 rpm - SAE J1349 230 HP
Engine Model Cat C7.1
Maximum Power - 2,100 rpm - ISO 14396 - Metric 253 HP
Maximum Net Torque - 1,300 rpm 858 ft·lbf

Weights

Operating Weight 42357 lb
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m� (4.1 yd�) general purpose bucket with BOCE.

Buckets

Bucket Capacities 2.5-9.2 m³ (3.3-12.0 yd³)

Dimensions - Standard Lift

Height - Top of ROPS 11.33 ft
Centerline of Rear Axle to Edge of Counterweight 6.33 ft
Height - Top of Hood 8.83 ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Centerline of Rear Axle to Hitch 5.5 ft
Overall Length - Without Bucket 22.67 ft
Hinge Pin Height at Maximum Lift 13.25 ft
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 59 degrees
Height - Top of Exhaust Pipe 11.17 ft
Maximum Width - Over Tires - Loaded 9.25 ft
Lift Arm Clearance at Maximum Lift 10.75 ft
Ground Clearance 1.17 ft
Hinge Pin Height at Carry Height 2.08 ft
Wheel Base 11 ft
Tread Width 7 ft
Rack Back at Ground 36 degrees

Operating Specifications

Note (1) For a machine configuration as defined under "Weight."
Static Tipping Load - Full 40° Turn - With Tire Deflection 24262 lb
Breakout Force 40690 lbf
Static Tipping Load - Full 40° Turn - No Tire Deflection 25926 lb
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Hydraulic System

Implement Pump Type Variable Axial Piston
Implement System - Maximum Pump Output at 2,150 rpm 76 gal/min
Implement System - Maximum Operating Pressure 4250 psi
Hydraulic Cycle Time - Total 8.9 s

Dimensions

Overall Length (without bucket) 22.8 ft
Maximum Width over Tires (loaded) 9.3 ft
Tread Width 7 ft
Height - Top of ROPS 11.4 ft
Height - Top of Hood 8.1 ft
Height - Top of Exhaust Pipe 11.2 ft
Hinge Pin Height at Carry Height 2.1 ft
Hinge Pin Height at Maximum Lift 13.3 ft
Ground Clearance 1.2 ft
Centerline of Rear Axle to Edge of Counterweight 6.4 ft
Centerline of Rear Axle to Hitch 5.6 ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Wheel Base 11 ft

Transmission

Forward - 2 7.5 mile/h
Forward - 1 4.3 mile/h
Forward - 5 24.5 mile/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 3 16 mile/h
Forward - 4 16 mile/h
Forward - 3 12 mile/h
Reverse - 2 7.5 mile/h
Reverse - 1 4.3 mile/h

Service Refill Capacities

Fuel Tank 72.6 gal (US)
Differential - Final Drives - Front 11.4 gal (US)
Cooling System 15.6 gal (US)
Hydraulic Tank 33 gal (US)
Transmission 11.4 gal (US)
Differential - Final Drives - Rear 11.4 gal (US)
DEF Tank 4.2 gal (US)
Crankcase 5.8 gal (US)

Dimensions - High Lift

Height - Top of Hood 8.83 ft
Hinge Pin Height at Carry Height 2.58 ft
Height - Top of ROPS 11.33 ft
Lift Arm Clearance at Maximum Lift 11.92 ft
Centerline of Rear Axle to Hitch 5.5 ft
Hinge Pin Height at Maximum Lift 14.83 ft
Rack Back - Carry Height 49 degrees
Ground Clearance 1.17 ft
Centerline of Rear Axle to Edge of Counterweight 6.33 ft
Overall Length - Without Bucket 24.58 ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Maximum Width - Over Tires - Loaded 9.25 ft
Tread Width 7 ft
Rack Back at Ground 40 degrees
Rack Back - Maximum Lift 59 degrees
Wheel Base 11 ft
Height - Top of Exhaust Pipe 11.17 ft

Sound

Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 69 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A)
Note (2) **For machines in European Union countries and in countries that adopt the EU Directives.
Note (3) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 104 LWA***

Engine - Tier 4 Final/Stage IV

Emissions Tier 4/Stage IV

Bucket Capacities

Bucket Range 2.5-9.2 m³ (3.3-12.0 yd³)