New CAT Equipment

930M Ag Handler Small Wheel Loader

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Get a Quote

    Learn more about the 930M Ag Handler Small Wheel Loader

    Watch

    https://youtu.be/GCm9JMoCnwc

    Product Specs

    Engine

    Engine Model Cat® C7.1
    Maximum Gross Power 168 HP
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 601 ft·lbf
    Stroke - Performance Power Mode: Range 1-4 5.3 in
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
    Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 797 N·m
    Displacement (Performance Power Mode: Speed Range 1-4) 428 in³
    Emissions Engine meets U.S. EPA Tier 4 Final emission standards.
    Note (4) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 170 HP
    Note (2) **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Note (3) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168 HP
    Note (1) *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
    Bore (Standard Power Mode: Range 1-4) 4.1 in
    Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) 156 HP
    Stroke (Standard Power Mode: Range 1-3**) 5.3 in
    Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) 156 HP
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**) 1600 r/min
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 166 HP
    Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 164 HP
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**) 158 HP
    Bore (Standard Power Mode: Range 1-3**) 4.1 in
    Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) 587 ft·lbf
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**) 795 N·m
    Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**) 776 N·m
    Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 163 HP
    Displacement (Standard Power Mode: Range 1-3**) 428 in³
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**) 160 HP
    Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**) 162 HP
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**) 573 ft·lbf

    Buckets

    Bucket Capacities 3.1-5.0 m3 (4.0-6.5 yd3)
    Bucket Capacities - Light Material 3.1-5.0 m3 (4.0-6.5 yd3)

    Weights

    Operating Weight 31876 lb

    Cab

    ROPS ISO 3471:2008
    FOPS ISO 3449:2005 Level II
    Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A)
    Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A)
    Note (1) *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.

    Steering

    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5 turns
    Maximum Flow - Steering Pump 34 gal/min
    Steering Cylinder, Double Acting - Bore Diameter 2.8 in
    Steering Cylinder, Double Acting - Stroke 17.2 in
    Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Maximum Working Pressure - Steering Pump 3500 psi
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
    Steering Articulation Angle - Each Direction 40°
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
    Steering Cylinder, Double Acting - Rod Diameter 1.6 in

    Loader Hydraulic System

    Relief Pressure - Tilt Cylinder 4351 psi
    Cycle Times - 1,600 rpm - Standard: Total Cycle Time 10.1 s
    Maximum Flow - Implement Pump 50 gal/min
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) 1.5 s
    Note *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
    Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time 9.3 s
    Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) 2.7 s
    Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) 5.1 s
    Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) 2.7 s
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 4061 psi
    Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) 1.7 s
    Maximum Working Pressure - Implement Pump 4061 psi
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 4351 psi
    Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) 5.7 s
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 50 gal/min
    Lift Cylinder: Standard Lift Linkage - Bore Diameter 4.3 in
    Tilt Cylinder: Standard Lift Linkage - Stroke 21.9 in
    Tilt Cylinder: Standard Lift Linkage - Rod Diameter 2.8 in
    Lift Cylinder: Standard Lift Linkage - Rod Diameter 2.4 in
    Tilt Cylinder: Standard Lift Linkage - Bore Diameter 5.1 in
    Lift Cylinder: Standard Lift Linkage - Stroke 28.7 in

    Tires

    Standard Size 20.5 R25, radial (L-3)
    Note (2) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (1) Other tire choices are available. Contact your Cat dealer for details.
    Other Choices Include 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

    Service Refill Capacities

    Transmission - Gear Box 2.2 gal (US)
    Cooling System 7.9 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
    Fuel Tank 51.5 gal (US)
    Axles - Rear 6.6 gal (US)
    Hydraulic System - Including Tank 43.6 gal (US)
    Engine Crankcase 5.3 gal (US)
    Axles - Front 6.9 gal (US)
    Hydraulic Tank 23.8 gal (US)

    Power Train

    Note *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
    Rear Axle Oscillating
    Note (2) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Front Axle Fixed
    Front Axle - Traction Aid* Locking differential standard
    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 ± 10.5
    Brakes - Service Inboard wet disc
    Rear Axle - Traction Aid Limited slip differential optional
    Brakes - Parking Spring applied hydraulically released
    Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65 ± 7

    Transmission

    Forward - Range 2 8 mile/h
    Forward - Range 1* 1-13 km/h (0.6-8 mph)
    Reverse - Range 4 25 mile/h
    Reverse - Range 2 8 mile/h
    Note Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.
    Forward - Range 3 17 mile/h
    Forward - Range 4 25 mile/h
    Reverse - Range 3 17 mile/h
    Reverse - Range 1* 8 mile/h

    Air Conditioning System

    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

    Axles

    Rear Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
    Front Fixed; Locking differential (standard)