New CAT Equipment

926M Small Wheel Loader

Configured for Success

The Cat 926M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Reduced By 30% Engine Speed

    Lower engine speed lowers fuel burn.

    MORE Control

    More refined control with consistent and predictable stopping distances.

    Class Leading 68 dB(A) Sound Level

    When running at 1,600 RPM in Standard Mode.

    Learn more about the 926M Small Wheel Loader

    Watch

    • Air Conditioning System
      Air Conditioning
      The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
    • Axles
      Front
      Fixed; Locking differential (standard)
      Rear
      Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
    • Buckets
      Bucket Capacities
      1.9-5.0 m3 (2.5-6.5 yd3)
      Bucket Capacities - General Purpose
      1.9-2.5 m³ (2.5-3.2 yd³)
      Bucket Capacities - Light Material
      3.1-5.0 m³ (4.0-6.5 yd³)
    • Cab
      FOPS
      ISO 3449:2005 Level II
      Note (1)
      Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
      Note (2)
      The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
      – Standard cab: 68 ±3 dB(A)
      – Deluxe cab: 66 ±2 dB(A)
      Note (3)
      *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
      ROPS
      ISO 3471:2008
    • Engine
      Displacement (Performance Power Mode: Speed Range 1-4)
      427 in³
      Displacement (Standard Power Mode: Speed Range 1-3*)
      427 in³
      Engine Model
      Cat C7.1**
      Maximum Gross Power
      168 HP
      Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
      162 mhp
      Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)
      160 HP
      Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
      170 mhp
      Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)
      168 HP
      Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
      601 ft·lbf
      Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
      586 ft·lbf
      Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
      587 ft·lbf
      Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
      572 ft·lbf
      Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
      588 ft·lbf
      Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
      573 ft·lbf
      Note (1)
      Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
      Note (2)
      No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
      Note (3)
      *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
      Note (4)
      **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
      Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
      158 mhp
      Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
      156 HP
      Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
      156 HP
      Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
      166 mhp
      Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
      164 HP
      Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
      163 HP
    • Loader Hydraulic System
      Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
      1.5 s
      Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
      2.6 s
      Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
      5.5 s
      Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
      9.5 s
      Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
      1.7 s
      Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
      2.6 s
      Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
      6.2 s
      Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
      10.5 s
      Maximum Flow - Implement Pump
      40 gal/min
      Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
      40 gal/min
      Maximum Flow - Implement Pump - 4th Function Maximum Flow*
      40 gal/min
      Maximum Working Pressure - Implement Pump
      3771 psi
      Note (1)
      *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
      Relief Pressure - Tilt Cylinder
      4061 psi
      Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
      3771 psi
      Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
      4061 psi
    • Service Refill Capacities
      Cooling System
      7.9 gal (US)
      Diesel Exhaust Fluid (DEF) Tank
      5 gal (US)
      Engine Crankcase
      5.3 gal (US)
      Front Axles
      6.9 gal (US)
      Fuel Tank
      51.5 gal (US)
      Hydraulic System - Including Tank
      42.3 gal (US)
      Hydraulic Tank
      23.8 gal (US)
      Note
      DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
      Rear Axles
      6.6 gal (US)
      Transmission - Gear Box
      2.2 gal (US)
    • Sound
      Average Exterior Sound Pressure (ISO 6395:2008)
      101 dB(A)
      Note (1)
      European Union Directive “2000/14/EC.”
      Operator Sound Pressure (ISO 6396:2008)
      72 dB(A)
    • Steering
      Maximum Flow - Steering Pump
      34 gal/min
      Maximum Steering Torque - 0° (Straight Machine)
      37155 ft·lbf
      Maximum Steering Torque - 40° (Full Turn)
      27747 ft·lbf
      Maximum Working Pressure - Steering Pump
      3500 psi
      Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
      3.5 turns
      Steering Articulation Angle - Each Direction
      40°
      Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
      2.4 s
    • Sustainability
      Recyclability
      94%
    • Tires
      Note (1)
      Other tire choices are available. Contact your Cat dealer for details.
      Note (2)
      In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
      Note (3)
      Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
      Other Choices Include
      20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 17.5 R25, radial (L-2); 17.5 R25, radial (L-3); 17.5 R25, radial (L-5); 550/65 R25 radial (L-3); Skidder/Agriculture
      Standard Size
      20.5 R25, radial (L-3)
    • Transmission
      Forward and Reverse - Range 1*
      1-13 km/h (0.6-8 mph)
      Forward and Reverse - Range 2
      8 mile/h
      Forward and Reverse - Range 3
      17 mile/h
      Forward and Reverse - Range 4
      25 mile/h
      Note
      *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
    • Weights
      Operating Weight
      28193 lb
    POWER TRAIN
    • Axle Duo-Cone™ seal guards
    • Auto idle shut down feature
    • Cat C7.1 engine
      – Power modes (Standard and Performance)
      – Power by range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      – Operator modes (Default, TC, Hystat, and Ice)
      – Directional Shift Aggressiveness (fast, medium, slow)
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Oil sampling ports
    • Throttle lock and max speed limiter
    HYDRAULICS
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
    ELECTRICAL
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link™ PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
    OPERATOR ENVIRONMENT
    • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, pressurized
    • Camera, rearview, with dedicated display
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Hydraulic control lockout
    • Mirror, single
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Suspension seat, fabric
    OTHER STANDARD EQUIPMENT
    • Large-access enclosure doors with adjustable close/open force
    • Cat optimized Z-bar linkage with parallel lift
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures
    OPTIONAL EQUIPMENT
    • Autolube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Differential, limited slip, rear
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      – Camera, rearview integrated into advanced display
      – Electrically adjustable external heated mirrors (2)
      – Secondary display to enable features and adjust parameters
      – LED interior lighting
      – Sunscreen, front and rear
      – Touchscreen secondary display
      – Ride control adjustable speed activation
      – Preventative maintenance reminders
      – Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display*
    • Cold start package
      – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Counterweight, additional options
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guarding packages
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Payload Technology
      – Cat Production Measurement (CPM)
      – CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Rear Object Detection
    • Ride Control System, adjustable through secondary display
    • Seats
      – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      – Dual mode and secondary
    • Tire Pressure Monitoring (TPM)
    • *NOTE: Not all features are available in all regions.

    Download Resources

    Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
    Copyright © 2024 Fabick Cat | All Rights Reserved.

    Fabick Cat & Fabick Rents – The Cat Rental Store are not affiliated with Fabick, Inc. Click here for more information.