New CAT Equipment

907M Compact Wheel Loader

The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Get a Quote

Learn more about the 907M Compact Wheel Loader

Watch

Product Specs

Engine

Net Power 74 HP
Rated Net Power - 2,400 rpm - SAE J1349 73 HP
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 74 HP
Maximum Gross Power - ISO 14396 73 HP
Maximum Gross Power - SAE J1995 74 HP
Emissions *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards.
Engine Model Cat® C3.3B DIT*
Maximum Gross Power 73 HP
Stroke 4.7 in
Bore 3.7 in
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 191 ft·lbf
Note (4) Flywheel per the SAE reference conditions with the fan at maximum speed.
Displacement 201 in³
Maximum Gross Torque - ISO 14396 192 ft·lbf
Note (6) Stage V engine available for Europe only.
Note (5) The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Maximum Gross Power - DIN ISO 14396 74 HP
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (1) Net power ratings are tested at the reference conditions for the specified standard.
Note (2) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.

Weights

Operating Weight 12677 lb
Note Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured with a 1.0 m³ (1.31 yd³) bucket with bolt-on cutting edge.

Service Refill Capacities

Engine Crankcase 3 gal (US)
Hydraulic System - Including Tank 18.5 gal (US)
Fuel Tank 20.6 gal (US)
Cooling System 4.5 gal (US)
Axles - Rear N/A
Axles - Front N/A
Transmission - Gear Box 2.2 gal (US)
Hydraulic Tank 12.2 gal (US)

Operating Specifications

Rated Bucket Capacity 1.31 yd³
Clearance - Full Lift and 45° Dump 7.97 ft
Reach - Full Lift and 45° Dump 2.6 ft
Steering Articulation Angle - Each Direction 39°
Full Turn Tipping Load 7716 lb
Tipping Load - Full Turn - ISO 14397-1 7339 lb
Tipping Load - Straight - ISO 14397-1 9007 lb

Loader Hydraulic System

Relief Pressure - Tilt Cylinder Head 4496 psi
3rd Function Maximum Working Pressure 3408 psi
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow 19 gal/min
Relief Pressure - Tilt Cylinder Rod 2756 psi
Maximum Flow - Implement Pump 19 gal/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow 31 gal/min
Maximum Working Pressure - Implement Pump 3408 psi
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height 3 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Tilt Cylinder, Double Acting - Stroke 16.4 in
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift 9.6 s
Lift Cylinder, Double Acting - Rod Diameter 2 in
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time 9.6 s
Lift Cylinder, Double Acting - Stroke 27.4 in
Lift Cylinder, Double Acting - Bore Diameter 3 in
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height 1.5 s
Tilt Cylinder, Double Acting - Rod Diameter 2.2 in
Tilt Cylinder, Double Acting - Bore Diameter 3.5 in
Boost Flow Maximum Pressure 3191 psi

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

Note (2) **Vary with tire.
Departure Angle 33°
Height - Ground to Cab** 8.42 ft
Clearance - Level Bucket** 9.92 ft
Length - Overall* 17.92 ft
Dump Angle at Full Lift 45°
Dig Depth** 3.7 in
Machine Width 6 ft
Operating Weight 12913 lb
Height - Ground Clearance** 11 in
Reach - Bucket at 45°* 2.33 ft
Turning Radius - Inside of Tires 7.33 ft
Width - Tread Center 4.58 ft
Note (1) *Vary with bucket.
Clearance - Bucket at 45° * 8.08 ft
Length - Wheel Base 7.08 ft
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Width - Bucket 6.67 ft
Height - Bucket Pin** 10.58 ft
Articulation Angle 39°
Turning Radius - Over Bucket 14.67 ft

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

Clearance - Level Bucket** 9.92 ft
Width - Tread Center 4.58 ft
Machine Width 6 ft
Turning Radius - Inside of Tires 7.33 ft
Turning Radius - Over Bucket 14.67 ft
Length - Overall* 18.42 ft
Dig Depth** 4.2 in
Operating Weight 12913 lb
Height - Bucket Pin** 10.58 ft
Note (2) **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Clearance - Bucket at 45° * 7.67 ft
Width - Bucket 6.67 ft
Height - Ground to Cab** 8.42 ft
Dump Angle at Full Lift 45°
Reach - Bucket at 45°* 2.67 ft
Height - Ground Clearance** 11 in
Length - Wheel Base 7.08 ft
Articulation Angle 39°
Departure Angle 33°
Note (1) *Vary with bucket.

Buckets

Bucket Capacities 0.75-1.5 m3 (1.0-2.0 yd3)
Note All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Grapple 0.9 m³ (1.2 yd³) heaped
Multi-Purpose 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Light Material 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
General Purpose 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)

Cab

ROPS SAE J1040 MAY94, ISO 3471-1994.
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note (2) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.
Note (1) Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Steering

Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm 3 s
Nominal Flow - Steering Pump 12 gal/min
Maximum Steering Torque - 39° (Full Turn) 27747 ft·lbf
Steering Cylinder, Double Acting - Bore Diameter 3.1 in
Steering Articulation Angle - Each Direction 39°
Maximum Working Pressure - Steering Pump 3191 psi
Steering Cylinder, Double Acting - Rod Diameter 1.4 in
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left <6 turns
Steering Cylinder, Double Acting - Stroke 11.8 in

Tires

Note (4) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (2) 340/80 R18 AT-R Firestone
Option (7) 12.5/80 R18 Flexport
Note (3) In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (1) *Standard tire.
Option (1) 335/80 R18 XZSL Michelin
Option (6) 405/70 R18 SPT9 Dunlop*
Option (5) 340/80 R18 Bibload Michelin
Option (4) 340/80 R18 TRI2 Nokian
Option (3) 340/80 R18 XMCL Michelin
Note (2) Other tire choices available, contact your Cat dealer for details.

Drive Train

Forward - Range 2 12 mile/h
Forward - High Range 22 mile/h
Reverse - Range 2 12 mile/h
Forward - Range 1 6 mile/h
Reverse - Range 1 6 mile/h
Reverse - High Range 22 mile/h

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349 189 ft·lbf