New CAT Equipment

854K Wheel Dozer

Cat Wheel Dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. Engineered for your demanding work in large dozing applications, the 854K Wheel Dozer is the largest in the Cat Wheel Dozer line and is an ideal match for large mining operations, power generating utilities, the general contracting industry and wherever mobility, versatility and compaction is needed.

Get a Quote

Watch

Engine

Engine Model	Cat^® C32 ACERT^™
Gross Power	907 HP
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995	900 HP
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249	814 HP
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995	907 HP
Emissions (Tier 2 Equivalent): Net Power ISO - 9249	814 HP
Rated Speed	1750 r/min
Bore	5.7 in
Stroke	6.4 in
Displacement	1958 in²
Peak Torque - 1,200 rpm	3139 lb/ft
Torque Rise	30 %
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)	Net torque rise meets SAE J139.
Note (3)	No engine derating required up to 3050 m (10,000 ft) altitude.

Weights

Operating Weight

224254 lb

Transmission

Transmission Type	Cat Planetary Power Shift
Converter Drive - Forward 1	4.4 mile/h
Converter Drive - Forward 2	7.7 mile/h
Converter Drive - Forward 3	13.2 mile/h
Converter Drive - Reverse 1	4.8 mile/h
Converter Drive - Reverse 2	8.4 mile/h
Converter Drive - Reverse 3	14.6 mile/h
Direct Drive - Forward 1	Lock-up disabled
Direct Drive - Forward 2	8.1 mile/h
Direct Drive - Forward 3	14.2 mile/h
Direct Drive - Reverse 1	5 mile/h
Direct Drive - Reverse 2	8.9 mile/h
Direct Drive - Reverse 3	15.6 mile/h
Note	Travel speeds based on 45/65-45 L-5 46 ply tires.

Hydraulic System - Lift/Tilt

Output at 1,850 rpm and 6900 kPa (1,000 psi)	161 gal/min
Cylinders, Double Acting - Lift, Bore and Stroke	177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke	267 mm × 286 mm (0.88 ft × 0.94 ft)
Relief Valve Setting - Lift (Large Pump)	3289 psi
Relief Valve Setting - Tilt (Small Pump)	3560 psi

Service Refill Capacities

Fuel Tank - Standard	413 gal (US)
Cooling System	53 gal (US)
Crankcase	32 gal (US)
Transmission	45 gal (US)
Differential - Final Drives - Front	98 gal (US)
Differential - Final Drives - Rear	90 gal (US)
Hydraulic System - Implement and Brakes - Tank Only	81 gal (US)
Hydraulic System - Steering and Engine Cooling Fan - Tank Only	77 gal (US)

Axles

Front	Fixed
Rear	Oscillating at ±10 degrees
Maximum Single-Wheel Rise and Fall	22.6 in

Brakes

Meets ISO 3540:2011

Blades

Blade Capacities

25 to 45 m³ (33 to 58 yd³)

Cab

Air Conditioning	Standard air conditioning system contains environmentally friendly R134a refrigerant
Cab - ROPS/FOPS (1)	Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Cab - ROPS/FOPS (2)	SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
ROPS	ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
FOPS	FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Sound Performance (1)	The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Performance (2)	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance (3)	Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance (4)	The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).

Steering

Minimum Turning Radius	31 ft
Total Steering Angle	86 °
Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)	124 gal/min
Relief Valve Setting	5004 psi

Model 854K (Tier 4)

Serial Number Prefix

KK6

Model 854K (Tier 2)