Gross Power - SAE J1995 | 2100 HP |
Engine Model | Cat® 3516C HD |
Rated Net Power - ISO 9249 | 1969 HP |
Bore | 6.7 in |
Stroke | 8.3 in |
Displacement | 4766 in³ |
Net Power | 1969 HP |
Gross Power | 2100 HP |
Engine Model | Cat® 3516B EUI |
Gross Power | 1900 HP |
Rated Net Power - ISO 9249 | 1791 HP |
Bore | 6.7 in |
Stroke | 7.5 in |
Displacement | 4211 in³ |
Rated Gross Machine Weight | 715000 lb |
Chassis Weight | 218542 lb |
Nominal Rated Payload | 210 ton (US) |
Body Weight | 60684 lb |
Standard MSD Body (SAE 2:1) | 170 yd³ |
Standard X Body (SAE 2:1) | 161 yd³ |
Standard Dual Slope Body (SAE 2:1) | 141 yd³ |
Standard Combi Body (SAE 2:1) | 200 yd³ |
Standard Gateless Coal Body (SAE 2:1) | 250 yd³ |
Forward - 1 | 7.8 mile/h |
Forward - 2 | 10.6 mile/h |
Forward - 3 | 14.4 mile/h |
Forward - 4 | 19.4 mile/h |
Forward - 5 | 26.3 mile/h |
Forward - 6 | 35.5 mile/h |
Reverse | 7.3 mile/h |
Top Speed - Loaded | 35.5 mile/h |
Differential Ratio | 2.35:1 |
Planetary Ratio | 10.83:1 |
Total Reduction Ratio | 25.46:1 |
Effective Cylinder Stroke - Front | 4 in |
Effective Cylinder Stroke - Rear | 3.5 in |
Rear axle - Oscillation | ±5.6° |
Brake Surface - Front | 12662 in² |
Brake Surface - Rear | 18024 in² |
Standards | SAE J1473 OCT90 ISO 3450:1996 |
Pump Flow - High Idle | 193 gal/min |
Relief Valve Setting - Raise | 2500 psi |
Body Raise Time - High Idle | 18.9 s |
High Idle Body Lower Time - Float | 17.3 s |
High Idle Body Lower Time - Power | 15.6 s |
Front Axle - Empty | 46 % |
Rear Axle - Empty | 54 % |
Front Axle - Loaded | 33 % |
Rear Axle - Loaded | 67 % |
Note | Weight distributions optimized with Cat body. |
Standard Tires | 37.00-R57 |
Optional Tires | 40.00-R57 |
Fuel Tank - Standard | 550 gal (US) |
Fuel Tank - Optional | 1000 gal (US) |
Cooling System | 192 gal (US) |
Crankcase | 77 gal (US) |
Differential - Final Drives | 154 gal (US) |
Steering System | 50 gal (US) |
Brake Hoist System | 241 gal (US) |
Transmission Tank | 20 gal (US) |
ROPS Standards | Standards |
Sound Standards | Standards |
Steering Standards | SAE J1511 OCT90 ISO 5010:1992 |
Steering Angle | 36.07 ° |
Turning Diameter - Front Wheel | 90.32 ft |
Vehicle Clearance - Turn Circle | 99.18 ft |