New CAT Equipment
725C2 Articulated Truck
Get a Quote
Product Specs
Engine
| Engine Model | Cat C9.3 |
| Bore | 4.53 in |
| Stroke | 5.87 in |
| Displacement | 567 in³ |
| Gross Power - SAE J1995 | 320 HP |
| Peak Engine Torque Speed | 1200 r/min |
| Net Power - ISO 14396 | 316 HP |
| Net Power - SAE J1349 | 314 HP |
| Peak Engine Torque Net (SAE J1349) | 1262 ft·lbf |
| No Engine De-rating Below | 7500 ft |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat® C9.3 |
| Peak Engine Torque Gross (SAE J1995) | 1275 ft·lbf |
| Emissions | The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
| Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| Note (3) | Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions. |
| Note (1) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Weights
| Rated Payload | 26.5 ton (US) |
Body Capacities
| Heaped (SAE 2:1) | 19.6 yd³ |
| Struck | 14.4 yd³ |
| Tailgate Heaped SAE 2:1 | 20.4 yd³ |
| Tailgate Struck | 14.5 yd³ |
Transmission
| Forward - 1 | 5 mT/hr |
| Forward - 2 | 9 mT/hr |
| Forward - 3 | 14 mT/hr |
| Forward - 4 | 21 mT/hr |
| Forward - 5 | 29 mT/hr |
| Forward - 6 | 36 mT/hr |
| Reverse - 1 | 6 mT/hr |
Sound Levels
| Interior Cab | 76 dB(A) |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Operating Weights
| Front Axle - Rated Load | 5512 lb |
| Front Axle - Loaded | 37374 lb |
| Front Axle - Empty | 31835 lb |
| Center Axle - Loaded | 33455 lb |
| Rear Axle - Loaded | 32905 lb |
| Center Axle - Rated Load | 23700 lb |
| Total - Empty | 50795 lb |
| Total - Rated Load | 52912 lb |
| Rear Axle - Rated Load | 23700 lb |
| Total - Loaded | 103707 lb |
| Rear Axle - Empty | 9205 lb |
| Center Axle - Empty | 9755 lb |
Service Refill Capacities
| Fuel Tank | 108.8 gal (US) |
| Cooling System | 21.9 gal (US) |
| Hydraulic System | 29.1 gal (US) |
| Engine Crankcase | 10 gal (US) |
| Transmission | 12.4 gal (US) |
| Final Drives/Differential | 33 gal (US) |
| Output Transfer Gear Box | 6.3 gal (US) |
| DEF Tank | 5.3 gal (US) |
Body Hoist
| Raise Time | 10 s |
| Lower Time | 8 s |
Steering
| Lock to Lock | 4.75 seconds @ 60 rpm |
Standards
| Brakes | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2007 |
Body Plate
| Type | High strength Brinell HB450 wear resistant steel |
Turning Circle
| Turning Dimensions - SAE Turning Radius | 294 in |
| Turning Dimensions - Aisle Width | 210 in |
| Turning Dimensions - Clearance Radius | 318 in |
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
| Turning Dimensions - Inside Radius | 153 in |