New CAT Equipment

637K Wheel Tractor-Scraper

Cat’s 637K Wheel Tractor-Scraper is engineered to conquer challenges operators face worldwide. With its strength and durability, it works in some of the most difficult conditions and materials one can find.

Get a Quote

    Learn more about the 637K Wheel Tractor-Scraper

    Watch

    Product Specs

    General

    Rated Load 37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)
    Fuel Tank Refill Capacity - Scraper 370 gal (US)
    180° Curb-to-Curb Turning Width 40.12 ft
    Overall Shipping Height 13.62 ft
    Overall Width 12.93 ft
    Top Speed - Loaded 34.7 mile/h
    Scraper Capacity - Heaped 34 yd³
    Width - Cut 11.5 ft
    Maximum Depth of Cut 17.7 in
    Tires - Scraper 37.25R35**E3
    Maximum Depth of Spread 21.1 in
    Scraper Capacity - Struck 24 yd³
    Tires - Tractor 37.25R35**E3

    Engine

    Rated Engine RPM - Tractor 1900 r/min
    Rated Engine RPM - Scraper 2150 r/min
    Flywheel Power - Scraper 290 HP
    Engine Model - Scraper Cat C9.3
    Emissions Cat C9.3 and C18 engines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Flywheel Power - Tractor 570 HP
    Engine Model - Tractor Cat C18

    Tractor Engine

    Flywheel Power - Tractor/Scraper 570 HP

    Scraper Bowl

    Scraper Capacity - Heaped 34 yd³

    Transmission

    Top Speed - Loaded 34.7 mile/h

    Service Refill Capacities

    Crankcase - Tractor 13.7 gal (US)
    Crankcase - Scraper 6.5 gal (US)
    Transmission System - Tractor 29 gal (US)
    Hydraulic System 37.5 gal (US)
    Diesel Exhaust Fluid - Scraper 5.8 gal (US)
    Diesel Exhaust Fluid - Tractor 8 gal (US)
    Fuel Tank 370 gal (US)
    Transmission System - Scraper 12.9 gal (US)
    Cooling System - Scraper 16.1 gal (US)
    Cooling System - Tractor 19.8 gal (US)

    Dimensions

    Front of Tractor to Front Axle 142.2 in
    Axle to Vertical Hitch Pin 20 in
    Wheel Base 346.8 in
    Rear Axle - Rear of Machine 90.2 in
    Width - Inside of Bowl 134 in
    Height - Scraper Blade Maximum 20 in
    Length - Overall Machine - Standard 597 in
    Height - Overall Shipping 163.2 in
    Width - Outside Rear Tires 143.2 in
    Length - Maximum (Push-Pull) 655.1 in
    Extended Push Block (Push-Pull) 108 in
    Width - Rear Tire Centers 96.9 in
    Width - Overall Machine 155 in
    Width - Tractor 137.8 in
    Height - Top of Cab 147 in
    Ground Clearance - Tractor 26.1 in

    Non Push-Pull

    Overall Length 49.34 ft
    Operating Weight - Empty 114950 lb

    Push-Pull

    Overall Length - With Bail Down 54.59 ft
    Operating Weight - Empty 119060 lb

    Cab

    ROPS/FOPS ROPS/FOPS meet “ISO Standards.”
    Exterior Sound Level The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).

    Safety Criteria Compliance Standards

    Seat Belt SAE J386:FEB2006
    Reverse Alarm ISO 9533:2010
    Rollover Protection Structure (ROPS) ISO 3471:2008 for up to 21 282 kg (46,919 lb)
    Brakes ISO 3450:2011
    Falling Object Protective Structure (FOPS) ISO 3449:2005 Level II
    Steering System ISO 5010:2007

    Travel Speeds - Runout

    Transmission Gear - Third 7.7 mile/h
    Transmission Gear - Reverse 6.2 mile/h
    Transmission Gear - First 3.4 mile/h
    Transmission Gear - Seventh 25.7 mile/h
    Transmission Gear - Fifth 14.1 mile/h
    Transmission Gear - Eighth 34.7 mile/h
    Transmission Gear - Fourth 10.5 mile/h
    Transmission Gear - Second 6.2 mile/h
    Transmission Gear - Sixth 19 mile/h

    Implement Cycle Times

    Bail Lower 2.1 s
    Ejector Extend 8.5 s
    Apron Lower 3.8 s
    Bowl Raise 3.5 s
    Bowl Lower 3.5 s
    Apron Raise 4 s
    Bail Raise 1.5 s
    Ejector Retract 8.5 s