New CAT Equipment

621K Wheel Tractor-Scraper

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

Get a Quote

    Learn more about the 621K Wheel Tractor-Scraper

    Watch

    Product Specs

    General

    Maximum Depth of Cut 12.4 in
    Maximum Depth of Spread 21.3 in
    180° Curb-to-Curb Turning Width 38.71 ft
    Scraper Capacity - Struck 17.1 yd³
    Tires - Scraper 33.25R29**E3
    Overall Width 11.71 ft
    Overall Shipping Height 13.22 ft
    Width - Cut 10.3 ft
    Tires - Tractor Drive 33.25R29**E3
    Top Speed - Loaded 33.5 mile/h
    Fuel Tank Refill Capacity - Scraper 201 gal (US)
    Scraper Capacity - Heaped 24 yd³
    Rated Load 26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)

    Engine

    Rated Engine RPM - Tractor 2000 r/min
    Engine Model - Tractor Cat C13
    Flywheel Power - Tractor 407 HP
    Note Cat C13 engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.

    Tractor Engine

    Flywheel Power - Tractor/Scraper 304 kW (407 hp)

    Scraper Bowl

    Scraper Capacity - Heaped 24 yd³

    Transmission

    Top Speed - Loaded 33.5 mile/h

    Service Refill Capacities

    Hydraulic System 21.926 gal (US)
    Cooling System 11.89 gal (US)
    Fuel Tank 216.09 gal (US)
    Crankcase 8.08 gal (US)
    Diesel Exhaust Fluid 8.057 gal (US)
    Transmission System 24.76 gal (US)

    Dimensions

    Width - Overall Machine 141.1 in
    Width - Tractor 133.1 in
    Width - Inside of Bowl 120 in
    Width - Outside Rear Tires 128.9 in
    Height - Overall Shipping 158.6 in
    Height - Top of Cab 142.2 in
    Ground Clearance - Tractor 21.9 in
    Front of Tractor to Front Axle 122.8 in
    Axle to Vertical Hitch Pin 21.3 in
    Height - Scraper Blade Maximum 20.5 in
    Wheel Base 314.9 in
    Rear Axle - Rear of Machine 114.1 in
    Length - Maximum (Push-Pull) 613.2 in
    Length - Overall Machine - Standard 551.8 in
    Width - Rear Tire Centers 90.2 in
    Width - Overall Machine - Ladder Down 149.2 in

    Non Push-Pull

    Overall Length 45.9 ft
    Operating Weight - Empty 79787 lb

    Push-Pull

    Operating Weight - Empty 80630 lb
    Overall Length - With Bail Down 51.1 ft

    Cab

    ROPS/FOPS Meets SAE and ISO standards
    Exterior Sound Level The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A).

    Safety Criteria Compliance Standards

    Brakes ISO 3450:1996
    Seat Belt SAE J386:JUN1985
    Steering System ISO 5010:2007
    Reverse Alarm ISO 9533:2010
    Rollover Protection Structure (ROPS) ISO 3471:2008 for up to 17 084 kg (37,664 lb)
    Falling Object Protective Structure (FOPS) ISO 3449:2005 Level II

    Travel Speeds - Runout

    Transmission Gear - Sixth 18.4 mile/h
    Transmission Gear - Fifth 13.6 mile/h
    Transmission Gear - Reverse 5.7 mile/h
    Transmission Gear - Second 5.5 mile/h
    Transmission Gear - Third 7.5 mile/h
    Transmission Gear - First 3.1 mile/h
    Transmission Gear - Eighth 33.5 mile/h
    Transmission Gear - Fourth 10.1 mile/h
    Transmission Gear - Seventh 24.8 mile/h

    Implement Cycle Times

    Bail Lower 3.2 s
    Bail Raise 1.8 s
    Apron Lower 3.8 s
    Apron Raise 2.95 s
    Ejector Extend 5.2 s
    Ejector Retract 6.7 s
    Bowl Raise 3 s
    Bowl Lower 3.5 s